Hybrid Solution Virginia Panel Corporation’s newest connector solution, i2 Micro iCon, is ideal for small connector needs. Following the success of VPC’s popular rack and panel connector, iCon™, i2 was developed to satisfy the need for an even smaller connector. The i2 offers a solid state, one piece module receiver in each connector, making it the perfect solution for low I/O applications. The solution will be manufactured to the high quality standards that VPC holds for all of its products. Features and Benefits • Rugged engagement mechanism engineered for 10,000 cycles • Locking tabs with spring locks ensure even locking and engagement • Sleek 0.8” footprint • Optional keying prevents damage to connectors • 120 signal positions available using VPC’s QuadraPaddle technology • Straight-in locking prevents stubbing of pins • • 12 micro coax or micro power positions available Easy access to wiring with removable ITA backshell • Standard or twin female signal contacts allow PCB mountability • Rugged durability withstands drop and vibration testing • 60 pin header contains solderless pins and enables direct connection from the i2 receiver to PXI card 1400 NEW HOPE ROAD » WAYNESBORO, VA 22980-2647 » phone: (540)932-3300 » fax: (540)932-3369 » www.vpc.com i2 Micro iCon Hybrid Receiver Specifications Weight .25 lbs [.11 Kg] Frame Material Glass Reinforced Thermoplastic Hardware Material Stainlees Steel Alloy Available Contact Positions 120 Signal, 12 Micro Coax/ Power Cycle Life 10,000 Cycles Temperature -55° C to 105° C 20.32 .80 1 2 3 4 5 6 7 8 9 10 11 12 108.20 4.26 20.55 .81 i2 Micro iCon Hybrid ITA Specifications Weight .25 lbs [.11 Kg[ Frame Material and Clamp Housing Glass Reinforced Thermoplastic Latch Material Nickel Plated Berillium Copper Backshell Glass Reinforced Thermoplastic Cable Clamp Material Powder-Coated Aluminum Available Contact Positions 120 Signal, 12 Micro Coax/ Power Cycle Life 10,000 Cycles Temperature -55° C to 105° C Pa r t # 85.41 3.36 72.77 2.87 22.81 .90 20.32 .80 107.95 4.25 Description RECEIVERS 310 130 104 310 130 105 Receiver, i2 Micro iCon, 120/12 Position Hybrid, Loaded with 610 138 100 Twin Female Contacts Receiver, i2 Micro iCon, 120/12 Position Hybrid, for Crimp Contacts ITA 410 130 104 ITA, i2 Micro iCon, 120/12 Position Hybrid ACCESSORIES 310 113 569 410 112 924 Protective Cover, i2 Micro iCon, Receiver Protective Cover, i2 Micro iCon, ITA VIRGINIA PANEL CORPORATION vpc.com 4/5/11 60 Pin Header Specifications Material - Modules Thermoplastic Material - Contacts Gold-plated phos-bronze Available Contact Positions 60 Receiver Bracket for PCB Mounting Specifications Material 2024 aluminum with a clear chromate finish Strain Relief Plate Specifications Frame Material Thermoplastic Hardware Material Stainlees Steel Alloy Available Contact Positions 168 Cycle Life 10,000 Cycles Temperature -55° C to 100° C Keying Pins Specifications Material Clear Anodized Aluminum Temperature -55° C to 100° C Pa r t # Description ACCESSORIES 310 113 461 310 113 559 310 113 562 510 109 206 Keying Pin Kit, iCon, Receiver and ITA Strain Relief Plate, i2 Micro iCon, Receiver Bracket, i2 Micro iCon, Receiver, for PCB Mounting Header, 60 Pin, Right Angle, Solderless VIRGINIA PANEL CORPORATION vpc.com 4/5/11 QuadraPaddle Signal Contacts ® Micro Coaxial Contacts Contact Specifications Contact Specifications Operating Current & Voltage 5 Amp Max. Continuous; 600 volt Max. use of wire Mil-W-16878/4 Contact Resistance 25 mOhms Max. Measured at 50 mV @ 100 mA Mating Force 2 oz. Nominal [0.05 Kg] Dielectric Withstanding Voltage (DWV) 1500 VDC Min. Insulation Resistance 5000 MOhms Min. Contact Body Material Twin Female (RCV) – BeCu Crimp (RCV) – BeCu/PhBrz Male (ITA) – Brass Characteristic Impedance 50 Ohm 75 Ohm • for RG179 50 Ohm • for RG316 double shield Frequency Range DC – 3 GHz • 50 Ohm DC – 2 GHz • for RG179 DC – 10.5 GHz • for RG316 double shield Contact Isolation −90 dB minimum VSWR 1.22 @ 3 GHz • 50 Ohm 1.39 @ 2 GHz • for RG179 1.0225 +.05 f(GHz) • for RG316 double shield Mating Force 1.5 lbs Max. [0.68 Kg] Contact Plating 30µ" Au over 100µ" Ni Insertion Loss – √f(GHz) x .06 db Cycle Life 20,000 Cycles Dielectric Withstanding Voltage (DWV) 800 V RMS Contact Plating 50µ" Au over 100µ" Ni Cycle Life 10,000 Cycles Micro Power Contacts Contact Specifications Operating Voltage & Current 21 Amp Continuous Contact Resistance 1.5 mOhms Max. Mating Force 2.0 lbs Max. [.91 Kg] Dielectric Withstanding Voltage (DWV) 1500 VDC Min. Contact Body Material Brass Contact Plating 30µ" Au over 100µ" Ni Cycle Life 10,000 Cycles Pa r t # Description QUADRAPADDLE CONTACTS 610 138 200 Signal Contact, Receiver, QuadraPaddle, 5 Amp, Twin Female – Replacement 610 138 216 Signal Contact, Receiver, QuadraPaddle, 5 Amp, 22-28 AWG, Crimp 610 138 109 Signal Contact, ITA, QuadraPaddle, 5 Amp, 22–24 AWG, Crimp/Solder 610 138 112Signal Contact, ITA, QuadraPaddle, 5 Amp, 26–30 AWG, Crimp/Solder MICRO POWER CONTACTS 610 142 101 610 142 102 610 143 101 Micro Power Contact, Receiver, 12-14 AWG, Crimp Micro Power Contact, Receiver, PCB Mount Micro Power Contact, ITA, 12-14 AWG, Crimp MICRO COAXIAL CONTACTS 610 140 101 610 140 102 610 140 103 610 140 104 610 141 101 610 141 102 610 141 103 610 141 104 Micro Coaxial Contact, Receiver, RG316, Crimp Micro Coaxial Contact, Receiver, RG178, Crimp Micro Coaxial Contact, Receiver, RG179, Crimp Micro Coaxial Contact, Receiver, RG316 Double Shield, Solder Micro Coaxial Contact, ITA, RG316, Crimp Micro Coaxial Contact, ITA, RG178, Crimp Micro Coaxial Contact, ITA, RG179, Crimp Micro Coaxial Contact, ITA, RG316 Double Shield, Solder VIRGINIA PANEL CORPORATION vpc.com 4/5/11