W83310S/W83310SG Winbond Bus Termination Regulator With Over Temp. & Current Limit Protection W83310S W83310SG -1- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG W83310S Datasheet Revision History PAGES 1. VERSION MAIN CONTENTS DATES VERSION Oct./03 0.5 N.A. All versions before 0.5 are for internal use only. ON WEB 2. 3,9 Oct./03 0.51 N.A. AC spec. and typical waveform update. 3 12 Feb./04 0.60 N.A. Add the thermal data. 4 3 Jul./04 0.61 N.A. Add min./typ. value of VIN. 5 2,3,11 Jan./06 0.7 N.A Modify application circuit, AC characteristic and add Pb-free part no: W83310SG. Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies mentioned in this datasheet belong to their respective owners. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. -2- W83310S/W83310SG Table of Contents1. GENERAL DESCRIPTION ......................................................................................................... 4 2. FEATURES ................................................................................................................................. 4 3. APPLICATIONS .......................................................................................................................... 4 4. PIN CONFIGURATION AND DESCRIPTION ............................................................................ 5 5. APPLICATION CIRCUIT............................................................................................................. 6 6. INTERNAL BLOCK DIAGRAM- W83310S ................................................................................. 7 7. ELECTRICAL CHARACTERISTICS........................................................................................... 8 7.1 AC CHARACTERISTICS................................................................................................ 8 8. TYPICAL OPERATING WAVEFORM......................................................................................... 9 9. PACKAGE DIMENSION (POWER SOP-8) .............................................................................. 15 10. THERMAL PERFORMANCE.................................................................................................... 16 11. ORDERING INFORMATION .................................................................................................... 16 12. HOW TO READ THE TOP MARKING...................................................................................... 16 -3- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG 1. GENERAL DESCRIPTION The W83310S is a linear regulator which provides achieves continuous 1.8 Amp bi-directional sinking and driving capability for DDR SDRAM bus terminator application. The chip simply implement a stable power supply which can track half of input power dynamically for bus terminator with a single chip; that is the chip integrates two power MOSFETs. There is no any external power device needed. The W83310S is promoted with SOP-8 power package. With W83310S design, a high integration, high performance, and cost-effective solution is promoted. 2. FEATURES y Regulates a bi-directional power with driving and sinking capability y Provides achieve continuous 1.8Amp driving and sinking current y Power MOSFET integrated y Low external component count y Low output voltage offset y Operates with +3.3V and +2.5V control power y Current limit protection y Over temperature protection y Power package SOP-8 y Low cost and easy to use 3. APPLICATIONS y DDR and DDR II Bus Termination Regulator y Active Termination Bus y SSTL-2 y SSTL-3 -4- W83310S/W83310SG 4. PIN CONFIGURATION AND DESCRIPTION VIN 1 GND 2 VREF 3 VOUT 4 8 NC inbond W83310S 7 NC 6 VCNTL 5 NC SYMBOL PIN FUNCTION VIN 1 Power input pin. GND 2 Ground. VREF 3 Reference voltage and Chip enable. VOUT 4 Output voltage. NC 5 No function VCNTL 6 Gate drive voltage. NC 7 No function NC 8 No function -5- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG 5. APPLICATION CIRCUIT 2.5VSTR 2.5VSTR/VCC3 U1 VIN R1 100K 3 C1 1000u Q1 1 2N7002 2 ENABLE# R2 100K C2 1u R4 1K C4 1u NC 3.3VDL/VCC3 GND NC VREF VCNTL VOUT NC C5 1000u W83310S/SG R3 1K C3 1u Note: R4=1 Kohm reserve for VOUT discharge or sink internal bias when VIN is not present but VCNTL is present. R3=1 Kohm reserve for sink internal bias when VCNTL is not present but VIN is present. -6- W83310S/W83310SG 6. INTERNAL BLOCK DIAGRAM- W83310S VCNTL VIN Current Limit & OTP Control VREF Logic Circuit VOUT GN -7- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG 7. ELECTRICAL CHARACTERISTICS 7.1 AC CHARACTERISTICS W83310S VIN=2.5V,VCNTL=3.3V,VREF=1.25V,COUT=100UF, TA = 0°C TO +70°C PARAMETER Output Offset Voltage SYMBOL MIN VOS Load Regulation Input Voltage Range Operating Current of VCNTL Operating Current of VIN TYP MAX UNITS -20 20 mV -20 20 -20 20 IOUT=0A Loading: 0AÆ2.0A mV Loading: 0AÆ2.0A 2.5/1.8 3.63 VCNTL 3.3 3.63 IVCNTL 1 1.5 mA No Load(IOUT=0A) 1 mA No Load(IOUT=0A) VIN 1.7 TEST CONDITIONS IVIN 0.8 Shutdown Threshold Trigger 0.2 50 Shutdown Current of VIN ISHDN Short Current Limit ILMT 4 Over Temperature Protection OTP 130 V V Output=High V Output=Low uA A 145 VREF<0.2V Loading=50 mA Output short to GND ℃ Note: Load regulation is tested with a 1ms duty pulse current and measuring VOUT. -8- W83310S/W83310SG 8. TYPICAL OPERATING WAVEFORM -- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 2.0Amp 1ms duty pulse driving current. ∆V ≈ 6mV. -- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 2.0Amp 1ms duty pulse sinking current. ∆V ≈ 2mV. -9- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG -- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 1.8Amp cont. driving current. ∆V ≈ 24mV. -- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 1.8Amp cont. sinking current. ∆V ≈ 5mV -10- W83310S/W83310SG -- Power on waveform with condition: DC loading 0A; VIN Cap.: 1000uF; VOUT Cap.: 1000uF. CH1: VIN; CH2: VOUT; CH3: VREF; CH4: Output current -- Power on waveform with condition: DC loading 1.5Amp; VIN Cap.: 1000uF; VOUT Cap.: 1000uF. CH1: VIN; CH2: VOUT; CH3: VREF; CH4: Output current -11- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG -- Power off waveform with condition: DC loading 0A; VIN Cap.: 1000uF; VOUT Cap.: 1000uF. CH1: VIN; CH2: VOUT; CH3: VREF; CH4: Output current -- Power off waveform with condition: DC loading 1.5A; VIN Cap.: 1000uF; VOUT Cap.: 1000uF. CH1: VIN; CH2: VOUT; CH3: VREF; CH4: Output current -12- W83310S/W83310SG -- Current limit protection: CH1: VOUT CH3: output current -- Current limit protection (cont.): CH1: VOUT; CH3: output current -13- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG -- Short protection and over temperature protection; CH4: output current -14- W83310S/W83310SG 9. PACKAGE DIMENSION (POWER SOP-8) -15- Publication Release Date: Jan. 2006 Revision 0.7 W83310S/W83310SG 10. THERMAL PERFORMANCE Test on Four-Layer (2S2P) JEDEC Test Board Package PSOP-8 Component Temp. (oC) Power (W) 3.05 Θ jc Package Die Downset Lead Ambient (oC /W) 100 145 79 78 25 14.7 11. ORDERING INFORMATION PART NUMBER PACKAGE TYPE W83310S 8L SOP-8 W83310SG 8L SOP-8(Pb-free package) 12. HOW TO READ THE TOP MARKING W83 310S 316GA W83 310SG 316GA Left line: Winbond logo 1st & 2nd lines: W83310S, W83310SG (Pb-free package) 3rd line: Tracking code Tracking code 316 G A 316: Packages assembled in Year 03’, week 16 G: assembly house ID; O means OSE, G means GR, etc. A: The IC version -16- W83310S/W83310SG Important Notice Winbond products are not designed, intended, authorized or warranted for use as components in systems or equipment intended for surgical implantation, atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, or for other applications intended to support or sustain life. Further more, Winbond products are not intended for applications wherein failure of Winbond products could result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. -17- Publication Release Date: Jan. 2006 Revision 0.7