The RM4136 and RV4136 are obsolete and are no longer supplied. D D D D D D D D D RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 RM4136 . . . J OR W PACKAGE ALL OTHERS . . . D OR N PACKAGE (TOP VIEW) Continuous Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity-Gain Bandwidth . . . 3 MHz Typ Gain and Phase Match Between Amplifiers Designed To Be Interchangeable With Raytheon RC4136, RM4136, and RV4136 Low Noise . . . 8 nV√Hz Typ at 1 kHz 1IN– 1IN+ 1OUT 2OUT 2IN+ 2IN– VCC– 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4IN– 4IN+ 4OUT VCC+ 3OUT 3IN+ 3IN– RM4136 . . . FK PACKAGE (TOP VIEW) 1IN+ 1IN– NC 4IN– 4IN+ description The RC4136, RM4136, and RV4136 are quad general-purpose operational amplifiers, with each amplifier electrically similar to the µA741, except that offset null capability is not provided. 1OUT NC 2OUT NC 2IN+ 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4OUT NC VCC+ NC 3OUT 2IN– VCC– NC 3IN– 3IN+ The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. 4 The RC4136 is characterized for operation from 0°C to 70°C, the RM4136 is characterized for operation over the full military temperature range of –55°C to 125°C, and the RV4136 is characterized for operation from –40°C to 85°C. NC – No internal connection symbol (each amplifier) + IN+ OUT – IN– AVAILABLE OPTIONS TA VIOMAX 25°C AT 25 C PACKAGE SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (J) PLASTIC DIP (N) FLAT (W) 0°C to 70°C 6 mV RC4136D — — RC4136N — –40°C to 85°C 6 mV RV4136D — — RV4136N — –55°C to 125°C 4 mV — RM4136FK RM4136J — RM4136W The D packages are available taped and reeled. Add the suffix R to the device type (e.g., RC4136DR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 The RM4136 and RV4136 are obsolete and are no longer supplied. schematic (each amplifier) VCC+ IN+ IN– OUT VCC– absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage (see Note 1): VCC+, RC4136 and RV4136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V VCC+, RM4136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC–, RC4136 and RV4136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V VCC–, RM4136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –22 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V Input voltage, VI (any input) (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15 V Duration of output short circuit to ground, one amplifier at a time (see Note 4) . . . . . . . . . . . . . . . . . Unlimited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Package thermal impedance, θJA (see Note 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package . . . . . . . . . . . . . . . . 300°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–. 2. Differential voltages are at IN+ with respect to IN–. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 5. The package thermal impedance is calculated in accordance with JESD 51-7. DISSIPATION RATING TABLE 2 PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70°C POWER RATING TA = 85°C POWER RATING TA = 125°C POWER RATING FK 800 mW 11.0 mW/°C 77°C 800 mW 715 mW 275 mW J 800 mW 11.0 mW/°C 77°C 800 mW 715 mW 275 mW W 800 mW 8.0 mW/°C 50°C 640 mW 520 mW 200 mW POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 The RM4136 and RV4136 are obsolete and are no longer supplied. RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 recommended operating conditions VCC+ VCC– MIN MAX Supply voltage 5 15 V Supply voltage –5 –15 V UNIT electrical characteristics at specified free-air temperature, VCC+ = 15 V, VCC– = –15 V PARAMETER TEST CONDITIONS† RC4136 MIN 25°C VIL Input offset voltage VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 Vi Input voltage range VOM Maximum peak out ut voltage output swing RM4136 TYP MAX 0.5 6 Full range MIN MAX 0.5 4 7.5 25°C 5 Full range 140 Full range 200 5 500 140 800 MAX 0.5 6 7.5 150 5 400 140 ±12 ±14 ±12 ±14 ±12 ±14 RL = 10 kΩ 25°C ±12 ±14 ±12 ±14 ±12 ±14 RL = 2 kΩ 25°C ±10 ±13 ±10 ±13 ±10 ±13 RL ≥ 2 kΩ Full range ±10 25°C 20 Full range 15 ±10 300 50 350 Unity-gain bandwidth 25°C ri Input resistance 25°C 0.3* 5 0.3* 5 RS = 50 Ω 25°C 70 90 70 90 VO = 0, kSVS Supply-voltage y g sensitivity (∆VIO/∆VCC) VCC = ±9 V to ±15 V, V VO = 0 25°C 30 Vn Equivalent input noise voltage (closed loop) AVD = 100, BW = 1 Hz, f = 1 kHz, RS = 100 Ω 25°C 8 ICC Supply current lifiers) (all four am amplifiers) VO = 0, Total power ower dissipation (all four amplifiers) VO = 0, Crosstalk attenuation (VO1/VO2) AVD = 100,, f = 10 kHz, RS = 1 kΩ No load No load 20 25 3 nA V V 300 V/mV 15 3.5 150 nA ±10 B1 VO = ±10 V, V RL ≥ 2 kΩ mV 500 1500 25°C UNIT 200 500 1500 Large-signal g g differential voltage amplification PD TYP 500 AVD Common-mode CMRR rejection ratio MIN 6 300 25°C RV4136 TYP 30 150 8 3 MHz 0.3* 5 MΩ 70 90 dB 30 150 8 nV√Hz 25°C 5 11.3 5 11.3 5 11.3 MIN TA 6 13.7 6 13.3 6 13.7 MAX TA 4.5 10 4.5 10 4.5 10 25°C 150 340 150 340 150 340 MIN TA 180 400 180 400 180 400 MAX TA 135 300 135 300 135 300 25°C 105 105 105 µ µV/V mA mW dB * This parameter is not production tested. † All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range is 0°C to 70°C for RC4136, –55°C to 125°C for RM4136, and –40°C to 85°C for RV4136. Minimum TA is 0°C for RC4136, –55°C for RM4136, and –40°C for RV4136. Maximum TA is 70°C for RC4136, 125°C for RM4136, and 85°C for RV4136. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 The RM4136 and RV4136 are obsolete and are no longer supplied. operating characteristics, VCC+ = 15 V, VCC– = –15 V, TA = 25°C PARAMETER tr SR 4 TEST CONDITIONS Rise time TYP UNIT 0.13 µs CL = 100 pF, RL = 2 kΩ Overshoot factor VI = 20 mV, VI = 20 mV, CL = 100 pF, RL = 2 kΩ 5 Slew rate at unity gain VI = 10 V, V CL = 100 pF, pF RL = 2 kΩ 17 1.7 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 % V/µs PACKAGE OPTION ADDENDUM www.ti.com 9-Feb-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) RC4136D OBSOLETE SOIC D 14 TBD Call TI Call TI RC4136DR OBSOLETE SOIC D 14 TBD Call TI Call TI RC4136N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type RC4136NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated