Card Connectors Series FPS SD Card and MMC Reader - Push / Push (Reversed Type) Specifications Insulation Resistance: 500MΩ min. at 500V DC Withstanding Voltage: 500V ACrms for 1 minute Contact Resistance: 100mΩ at 1mA / 20mV max. Voltage Rating: 5Vrms AC Current Rating: 0.5A Operating Temp. Range: –25°C to +85°C Coplanarity: < 0.1mm Mating Cycles: 10,000 times (office environment) Part Number (Details) FPS 009 - 2960 - 0 Series No. of Contacts Design Number Materials and Finish Insulator: LCP Shielding Plate: SUS Contacts: PB, Ni-Au and Sn Features Connector for both card types (MMC and SD card) For assembly underneath the PC-board (reversed) Smooth extraction function by Push-in/ Push-out of card Low profile (Ht. 2.85 x W. 28.00 x L. 29.00) EMI prevention SDIO capable Card detector Write protection switch Card mis-insertion prevention design Soft lock mechanism for SD card Card fling-out minimize design Tape & Reel packaging (500 pcs / reel) Outline Dimensions A-12 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Card Connectors Series FPS SD Card and MMC Reader - Push / Push (Reversed Type) Recommended PCB Layout FPS009-2960-0 SD and MMC Top View Prohibited Area Circuit Diagram for Switch Card Insertion Details Card pushed position Card locked position Card eject position SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-13