Card Connectors Series FPS SD Card and MMC Reader - Push / Push (Low Profile) Specifications Part Number (Details) Insulation Resistance: 1,000MΩ min. at 500V DC Withstanding Voltage: 500V ACrms for 1 minute Contact Resistance: 100mΩ at 1mA / 20mV max. Voltage Rating: 250Vrms AC Current Rating: 0.5A Operating Temp. Range: –25°C to +85°C Coplanarity: < 0.1mm Mating Cycles: 10,000 (office environment) FPS 009 - 2409 - 0 Series No. Number of Contacts Design No. 0 = Tape & Reel Packaging Materials and Finish Insulator: Shielding Plate: Contacts: LCP glass filled (GF 40%) UL94V-0 SUS, t = 0.20 PB, BeCu t = 0.18 / Contact area = Ni-Au / Solder Tails = Ni-SnCu Features Connector for both card types (MMC and SD card) Card detector Smooth extraction function by Push-in/ Push-out of card Write protection switch Soft lock mechanism for SD card Mechanism to avoid fling-off with the card Low profile (Ht. 2.8 x W. 28.0 x L. 30.5) Tape & Reel packaging (600 pcs / reel) Two-point contact, protection against electrical interruption Outline Dimensions A-8 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Card Connectors Series FPS SD Card and MMC Reader - Push / Push (Low Profile) Recommended PCB Layout for FPS009-2409-0 SD and MMC Top View Circuit Diagram for Switch Card Insertion Details Card locked position Card pushed position Card eject position SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-9