Card Connectors Series FPS SD Card & MMC Reader - Push / Push (Low Profile) Specifications Part Number (Details) Insulation Resistance: 1,000MΩ min. at 500V DC Withstanding Voltage: 500V ACrms for 1 minute Contact Resistance: 100mΩ at 1mA / 40mV max. Voltage Rating: 5V DC Current Rating: 0.5A Operating Temp. Range: –25°C to +85°C Coplanarity: < 0.1mm Mating Cycles: 10,000 (office environment) FPS 009 - 2901 - 0 Series No. Number of Contacts Design No. 0 = Tape & Reel Packaging Materials and Finish Insulator: LCP glass filled (GF 40%) Shielding Plate: SUS Contacts: PB, t = 0.15 / Contact area = Ni-Au / Features Connector for both card types (MMC and SD card) Smooth extraction function by Push-in/ Push-out of card Soft lock mechanism for SD card Super low profile (Ht. 2.80 x W. 28.10 x L. 27.10) Card detector Write protection switch Mechanism to avoid fling-off with the card Closed cover Tape & Reel packaging (500 pcs / reel) Outline Dimensions A-10 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Card Connectors Series FPS SD Card & MMC Reader - Push/Push (Low Profile) Recommended PCB Layout for FPS009-2901-0 SD and MMC Top View Prohibited Area Circuit Diagram for Switch Card Insertion Details Card locked position Card pushed position Card eject position SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-11