CLV1540E PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Digital Radios • Mobile Communications • Basestations £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1520 Typ Max Units 1565 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -110 dBc/Hz Harmonic Suppression (2nd) -20 dBc Tuning Voltage 0.5 4.5 MHz/V 23 Tuning Sensitivity (avg.) 4.5 dBm 100 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 2 MHz 85 °C Max Units Power Output -1.5 Load Impedance 1.5 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 24 Vdc 30 mA Additional Notes Phase Noise @ 100 kHz offset (1 Hz BW, typ.): -130 dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV1540E Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1590 1570 1550 85 °C 25 °C 1530 1510 -40 °C 1490 1470 1450 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 5 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 1 -1 0.030 MIN. CUTBACK FROM LIVE PADS -3 -5 -7 -9 1467 1488 1504 1518 1531 1542 1554 1565 1575 1585 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B