CRO0410A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Mobile Radio • VHF Radio • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 390 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -117 Harmonic Suppression (2nd) -15 Tuning Voltage .5 Max Units 430 MHz dBc/Hz -13 dBc 4.5 Vdc MHz/V 17 Tuning Sensitivity (avg.) -1 dBm Input Capacitance 47 pF Pushing .5 MHz/V Pulling (14 dB Return Loss, Any Phase) .1 MHz 70 °C Max Units Power Output -7 Load Impedance Operating Temperature Range 50 -30 Package Style Power Supply Requirements -4 MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 36 Vdc 44 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CRO0410A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 450 FREQUENCY (MHz) 440 430 420 70 °C 25 °C 410 400 -30 °C 390 380 370 360 0 0.6 1.2 1.8 2.4 3 3.6 4.2 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. -1 -2 -3 -4 0.030 MIN. CUTBACK FROM LIVE PADS -5 -6 -7 366 377 388 399 411 422 433 443 FREQUENCY (MHz) 70 °C 25 °C -30 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B