V500ME03-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Basestations • Mobile Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 500 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -105 Harmonic Suppression (2nd) -13 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 1000 MHz dBc/Hz -6 dBc 11 Vdc MHz/V 54 6 14 dBm 150 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Load Impedance 10 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 12 Supply Current (Icc) 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V500ME03-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1100 1050 1000 950 900 850 800 750 700 650 600 550 500 450 400 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 14 13 12 11 10 9 0.030 MIN. CUTBACK FROM LIVE PADS 8 7 6 5 4 455 524 583 640 695 748 794 849 901 952 1002 1050 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B