V950ME25-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Base Stations • Microwave Links • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5000 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -88 Harmonic Suppression (2nd) -32 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 6000 MHz dBc/Hz -25 dBc 22 Vdc MHz/V 56 -3 3 dBm Input Capacitance 50 pF Pushing 6 MHz/V Pulling (12 dB Return Loss, Any Phase) 8 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 0 MINI-16HL-SM Min Typ 5 22 Vdc 26 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V950ME25-LF Rev B2 FREQUENCY (MHz) Tuning Curve, typ. 6300 6200 6100 6000 5900 5800 5700 5600 5500 5400 5300 5200 5100 5000 4900 4800 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 5 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 4 3 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 4914 5046 5151 5252 5357 5472 5600 5735 5862 5974 6070 6150 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B