CRO3567A-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless Equipment • Satellite Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3565 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -112 Harmonic Suppression (2nd) -40 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 3568 MHz dBc/Hz -33 dBc 4.5 Vdc MHz/V 8 1 5 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 3 MINI-16-SM Min Typ 5 17 Vdc 22 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CRO3567A-LF Rev B2 Tuning Curve, typ. FREQUENCY (MHz) 3595 3590 3585 85 °C 25 °C -40 °C 3580 3575 3570 3565 3560 3555 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 3559 3561 3563 3565 3568 3570 3574 3578 3583 3588 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B