CLV0436A-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Wireless Radios • Base-stations • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 405 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -114 Harmonic Suppression (2nd) -22 Tuning Voltage 0.3 Tuning Sensitivity (avg.) Power Output Max Units 467 MHz dBc/Hz -18 dBc 4.4 Vdc MHz/V 18 -6 -2 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (12 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) -4 MINI-16-SM Min Typ 5 40 Vdc 50 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV0436A-LF Rev B2 Tuning Curve, typ. 480 FREQUENCY (MHz) 470 460 450 440 85 °C 25 °C -40 °C 430 420 410 400 390 380 370 0 0.6 1.2 1.8 2.4 3 3.6 4.2 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0 -1 -2 -3 -4 -5 0.030 MIN. CUTBACK FROM LIVE PADS -6 -7 -8 -9 -10 383 400 415 426 437 447 456 468 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B