SMV5815A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • RFID • Fixed Broadband Wireless • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5790 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -84 Harmonic Suppression (2nd) -40 Tuning Voltage 0.5 Max Units 5840 MHz dBc/Hz -30 dBc 3 Vdc MHz/V 130 Tuning Sensitivity (avg.) 3 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (14 dB Return Loss, Any Phase) 9 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 SUB-L Min Typ Supply Voltage (Vcc, nom.) 3 Supply Current (Icc) 19 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV5815A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 6000 FREQUENCY (MHz) 5950 5900 5850 5800 5700 85 °C 25 °C 5650 -40 °C 5750 5600 5550 5500 5450 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 5 RECOMMENDED FOOTPRINT 4 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 -1 -2 0.030 MIN. CUTBACK FROM LIVE PADS -3 -4 -5 5525 5556 5585 5614 5644 5675 5707 5740 5775 5810 5844 5886 5922 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B