USSP2400-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Personal Communication Systems • W-CDMA Basestations • Portable Radios £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2400 Typ Max Units 2485 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -83 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage .5 2.5 MHz/V 120 Tuning Sensitivity (avg.) 2 dBm Input Capacitance 25 pF Pushing 35 MHz/V Pulling (14 dB Return Loss, Any Phase) 13 MHz 85 °C Max Units Power Output -5 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) -1.5 Vdc USSP Min Typ 2.7 6 Vdc 9 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B USSP2400-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 2580 2560 2540 2520 2500 2480 2460 2440 2420 2400 2380 2360 2340 2320 2300 2280 2260 2240 2220 2200 2180 2160 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 3 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 2215 2291 2357 2419 2481 2542 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B