V602ME35-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Personal Communication Systems • Earthstations • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1000 Typ Max Units 1600 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -100 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 0 12 MHz/V 98 Tuning Sensitivity (avg.) 9 dBm 150 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output 4 Load Impedance 6.5 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 21 Vdc 25 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V602ME35-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 1990 1930 1870 1810 1750 1690 1630 1570 1510 1450 1390 1330 1270 1210 1150 1090 1030 970 910 850 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 12 11 10 9 8 7 6 5 4 3 2 1 0 887 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 1046 1161 1262 1355 1444 1528 1609 1686 1759 1832 1903 1974 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B