V582ME09-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test and Measurement • Portable Radios • Mobile Communications £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1000 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -108 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Max Units 1040 MHz dBc/Hz -14 dBc 4.5 Vdc MHz/V 25 Tuning Sensitivity (avg.) 3 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 MINI-16HL-SM Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 12 Vdc 16 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V582ME09-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1100 1075 1050 1025 1000 85 °C 25 °C 975 -40 °C 950 925 900 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 5 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 4 3 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 947 967 983 997 1010 1022 1034 1046 1057 1069 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B