CRO2460A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Basestations • Digital Radios • Satellite Communications £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2435 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -113 Harmonic Suppression (2nd) -15 Tuning Voltage 1 Max Units 2485 MHz dBc/Hz -10 dBc 10 Vdc MHz/V 8 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing .7 MHz/V Pulling (14 dB Return Loss, Any Phase) .7 MHz 85 °C Max Units Power Output 3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 6 MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 30 Vdc 36 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CRO2460A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 2505 FREQUENCY (MHz) 2495 2485 2475 2465 2445 85 °C 25 °C 2435 -40 °C 2455 2425 2415 2405 2395 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 2405 2422 2434 2445 2455 2464 2472 2479 2485 2491 2495 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B