V965ME04-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communications • VSAT Systems • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 6500 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -85 Harmonic Suppression (2nd) -19 Tuning Voltage 0.5 Max Units 6550 MHz dBc/Hz -18 dBc 4.5 Vdc MHz/V 80 Tuning Sensitivity (avg.) 1 dBm Input Capacitance 25 pF Pushing 6 MHz/V Pulling (14 dB Return Loss, Any Phase) 12 MHz 85 °C Max Units Power Output -6 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -2.5 MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 50 Vdc 56 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V965ME04-LF Voltage-Controlled Oscillator Surface Mount Module Rev B2 FREQUENCY (MHz) Tuning Curve, typ. 6700 6675 6650 6625 6600 6575 6550 6525 6500 6475 6450 6425 6400 6375 6350 6325 6300 6275 6250 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 -6 6302 6344 6371 6410 6437 6476 6520 6565 6605 6645 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B