V844ME01-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Satellite Up/Down Conversion • Microwave Links £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3200 Typ Max Units 3400 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -88 dBc/Hz Harmonic Suppression (2nd) -25 dBc Tuning Voltage 0.5 4.5 MHz/V 103 Tuning Sensitivity (avg.) 8 dBm Input Capacitance 50 pF Pushing 9 MHz/V Pulling (14 dB Return Loss, Any Phase) 16 MHz 85 °C Max Units Power Output 4 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 6 Vdc MINI-14H Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 18 Vdc 21 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V844ME01-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 3520 3480 3440 3400 3360 3320 3280 3240 3200 3160 85 °C 25 °C -40 °C 3120 3080 3040 3000 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 0.030 MIN. CUTBACK FROM LIVE PADS 5 4 3053 3104 3150 3196 3244 3296 3348 3401 3455 3504 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B