V842ME05-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Satellite Up/Down Conversion • Microwave Links £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3010 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -88 Harmonic Suppression (2nd) -27 Tuning Voltage 1.5 Max Units 3340 MHz dBc/Hz -20 dBc 15 Vdc MHz/V 52 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 25 pF Pushing 9 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements .5 MINI-14H-L Min Typ Supply Voltage (Vcc, nom.) 8.5 Supply Current (Icc) 20 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V842ME05-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 3700 FREQUENCY (MHz) 3600 3500 3400 85 °C 25 °C 3300 3200 3100 -40 °C 3000 2900 2800 2700 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 -1 -2 -3 2782 2917 3015 3099 3176 3251 3323 3395 3467 3535 3596 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B