V956ME01-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Instruments • Microwave Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 6175 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -85 Harmonic Suppression (2nd) -30 Tuning Voltage 0.3 Max Units 6325 MHz dBc/Hz -28 dBc 4.7 Vdc MHz/V 70 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 16 MHz/V Pulling (14 dB Return Loss, Any Phase) 15 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 2 MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 26 Vdc 31 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V956ME01-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 6420 FREQUENCY (MHz) 6380 6340 6300 85 °C 25 °C 6260 6220 6180 -40 °C 6140 6100 6060 6020 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 -1 6038 6081 6117 6160 6191 6223 6265 6298 6336 6372 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B