V608ME06 PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Basestations • Test Instruments • Downconvertors £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1900 Typ Max Units 2270 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -91 dBc/Hz Harmonic Suppression (2nd) -17 dBc Tuning Voltage 2 10 MHz/V 61 Tuning Sensitivity (avg.) 10 dBm 150 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 25 MHz 70 °C Max Units Power Output 4 Load Impedance 7 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14H Min Typ Supply Voltage (Vcc, nom.) 12 Supply Current (Icc) 15 Vdc 20 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V608ME06 Voltage-Controlled Oscillator Surface Mount Module Rev B2 Tuning Curve, typ. FREQUENCY (MHz) 2400 2300 2200 70 °C 25 °C 2100 2000 -40 °C 1900 1800 1700 1600 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 1645 1754 1840 1915 1982 2045 2105 2164 2223 2282 2340 FREQUENCY (MHz) 70 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B