ZRO0743B2LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital communication systems • Downconverters • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 738 Typ Max Units 748 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -131 dBc/Hz Harmonic Suppression (2nd) -20 dBc Tuning Voltage 0 6 MHz/V 2 Tuning Sensitivity (avg.) 11 dBm Input Capacitance 100 pF Pushing .06 MHz/V Pulling (12 dB Return Loss, Any Phase) .3 MHz 85 °C Max Units Power Output 7 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 9 Vdc ZMX-14-SM Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 23 Vdc 28 mA Additional Notes Phase Noise @ 1 kHz offset (1 Hz BW) -104 (typ) dBc/Hz Phase Noise @ 100 kHz offset (1 Hz BW) -151 (typ) dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B ZRO0743B2LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 755 750 745 85 °C 25 °C 740 -40 °C 735 730 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 736 SEVERAL HOLES OF o 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 738 739 740 741 742 743 744 746 747 748 750 751 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions GOLD PLATED PADS SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B