SLV0915C-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • RFID • Mobile Communications • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 902 Typ Max Units 928 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -123 dBc/Hz Harmonic Suppression (2nd) -27 dBc Tuning Voltage 0 11 MHz/V 5 Tuning Sensitivity (avg.) 7 dBm Input Capacitance 50 pF Pushing .26 MHz/V Pulling (14 dB Return Loss, Any Phase) .15 MHz 85 °C Max Units Power Output 3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 5 Vdc MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 29 Vdc 32 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SLV0915C-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 960 940 85 °C 25 °C 920 -40 °C 900 880 0 2 4 6 8 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 894 901 907 915 924 937 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B