Prosafe Trapped Key Interlock Switches Switchgear Adaptors Product Selection (3/8 sq shaft) Mounting Type Trap Direction 65° CW to Trap 65° CCW to Trap 90° CW to Trap 90° CCW to Trap +/- 90° to Trap 45° CW to Trap 45° CCW to Trap 45° Catalogue Number 440T-MSGAU10➊ 440T-MSGAU11➊ 440T-MSGAU12➊ 440T-MSGAU13➊ 440T-MSGAU14➊ 440T-MSGAU17➊ 440T-MSGAU18➊ ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. Accessories Description The switch gear adaptor is used to interlock preparatory switch gear applications or other host equipment such as spool valves. Power is isolated and locked off when the key is rotated and removed. The key can then be used in the next sequence of operation. • Virtually maintenance free 440T-AKEYE10⊗ 5-33 440T-ASCBE14➊ 440T-ASFC11⊗ Dimensions are not intended to be used for installation purposes. 45° Mounting Type 63 ) Panel Drilling Details (2 . 36 (1.41) Dia. 8 (0.31) Dia. (on 50.8 PCD) 45 36 (1.41) Dia. A B C D E 16 (0.62) 9.5 (0.37) 8 (0.31) Dia. (on 50.8 PCD) 1 2 3 4 5 60 (2.36) 3.2 (0.12) 40 (1.57) The Prosafe Advantage 9.5 (0.37) square Stainless steel construction. 5-32 (0 19 .7 4) 8 (0.31) Dia. 45 8 (0.31) Dia. ( 0 17 .6 6) 2 (1 5.4 .0 ) 7 (0.27) Dia. 2 (1 5.4 .0 ) EN292-1&2, EN1088, ISO12100-1&2, ISO14119, AS4024.1 Cat. 1 per EN 954-1 BG and CE marked for all applicable directives -10°C to +50°C (14°F to +122°F) >100,000 15.1kN (3398lbs) 14Nm (124lb•in) 95% RH 0.30kg (0.66lbs) 316L Stainless steel 2 x M4 3/8sq in x 7/8in long (standard) 9/16in dia. x 7/8in long (optional— contact factory) 67 Operating Temperature Mechanical Operations Max. Shear Force to Key Max. Torque to Key Humidity Weight Material Mounting Shaft Dimensions Catalogue Number Approximate Dimensions—mm (inches) Specifications Category Approvals Page Number ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ⊗ Substitute the desired code for this symbol. See page 5-6 for code selection. Features Standards Description Replacement Key Replacement Code Barrel Optional Dust Cap Prosafe Trapped Key Interlock Switches Accessories Product Selection Description Approximate Dimensions— mm (inches) Catalogue Number Stainless Steel Weatherproof Keys 17 (0.66) Standard Key 64 (2.51) 50 (1.96) 440T-AKEYE10⊗ 39 (1.54) Stainless Steel Weatherproof Dust Cap 440T-ASFC10⊗ 16 (0.63) 60.5 (2.38) Stainless Steel Weatherproof Dust Cap for Switchgear Adaptor 440T-ASFC11➊ 16 (0.63) 42 (1.65) Stainless Steel Replacement Code Barrel for 100A Rotary Switch 23 (0.91) 10 (0.39) 440T-ASCBE11➊ 32 (1.26) 2 Fixing Holes 4.5 (0.18) Dia 42 (1.65) Stainless Steel Replacement Code Barrels for Products Other than 100A RPS/RKS Units 23 (0.91) 440T-ASCBE14➊ 2 Fixing Holes 32 (1.26) 4.5 (0.18) Dia ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ⊗ Substitute the desired code for this symbol. See page 5-6 for code selection. ATTENTION: The presence of spare keys, override keys, or spare actuators can compromise the integrity of safety interlocking systems.Personal injury or death, property damage or economic loss can result from the introduction of spare keys, override keys or spare actuators into interlocking systems without appropriate management controls, working procedures and alternative protective measures to control their use and availability. 5-33