Prosafe Trapped Key Interlock Switches Bolt Interlocks Specifications Standards Category Approvals Single Dual Description The bolt interlocks are designed to allow access to hazardous areas when an appropriate key is inserted into the interlock. These bolt interlocks are manufactured in 316L stainless steel to provide a rugged, industrial grade method of helping prevent access through gates. Operating Temperature Mechanical Operations Max. Shear Force to Key Max. Torque to Key Humidity Weight Material Mounting Bolt EN292-1&2, EN1088, ISO12100-1&2, ISO14119, AS4024.1 Cat. 1 per EN 954-1 (ISO 13849-1) Suitable for Cat. 2, 3, or 4 systems BG, CE marked for all applicable directives and C-Tick not required -40°C to +200°C (-40°F to +392°F) 100,000 15.1kN (3398lbs) 14Nm (124lb•in) 95% RH (SBL) 0.60kg (1.32lbs) (DBL) 1.10kg (2.43lbs) 316L Stainless Steel SBL 2 x M5 Counterbored from Top or 2 x M5 from Underside with M5 Nuts DBL 4 x M5 Counterbored from Top or 4 x M5 from Underside with M5 Nuts 15mm (0.59in) Ø One advantage of the bolt interlocks is that there is no need to run power wires to the gate. Power is disconnected by a trapped key rotary switch on a control panel and the key is then hand-carried to the gate by the operator. The Single Bolt interlock (SBL) is designed to be used to access hazardous areas where partial body exposure is required. The SBL is not shipped with a key. If two keys are needed for partial body access, select the Dual Bolt interlock (DBL) that requires both keys to be trapped to operate. This version of the DBL does not include the keys. When whole body access is needed, the DBL, with one primary key and one secondary trapped key (included) should be used. The secondary key serves the function of a personnel key. This DBL allows the operator to carry the personnel key into the hazardous area. When the operator returns from the hazardous area and returns the personnel key to the DBL, the locking sequence can be reversed and the process re-started. Features • • • • • • • 316L Stainless steel construction Single or dual key units Various extensions of bolt Direct drive push/pull operation Replaceable code barrel assembly Fitted with tamper resistant screws Weatherproof stainless steel dust cap as standard The Prosafe Advantage Stainless steel construction. 5-20 Prosafe Trapped Key Interlock Switches Bolt Interlocks Product Selection Type Trapped Condition Single Key Key Trapped to Bolt Retract Both Keys Trapped to Retract Bolt Dual Key Primary Key Trapped, Secondary Key Free to Retract Bolt Bolt Retracted—mm (inches) 0 3 (0.11) 6 (0.23) 12 (0.47) 0 3 (0.11) 6 (0.23) 13 (0.51) 0mm 3 (0.11) 6 (0.23) 13 (0.51) Bolt Extended—mm (inches) 14 (0.55) 17 (0.66) 20 (0.78) 27 (1.06) 14 (0.55) 17 (0.66) 20 (0.78) 27 (1.06) 14 (0.55) 17 (0.66) 20 (0.78) 27 (1.06) Catalogue Number 440T-MSBLE10➊ 440T-MSBLE11➊ 440T-MSBLE12➊ 440T-MSBLE13➊ 440T-MDBLE10➊➊ 440T-MDBLE11➊➊ 440T-MDBLE12➊➊ 440T-MDBLE13➊➊ 440T-MDBLE14➊➋ 440T-MDBLE15➊➋ 440T-MDBLE16➊➋ 440T-MDBLE17➊➋ ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ➋ Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection. Accessories Description Replacement Key Replacement Code Barrel Replacement Dust Cap Page Number Catalogue Number 5-33 440T-AKEYE10⊗ 440T-ASCBE14➊ 440T-ASFC10⊗ ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ⊗ Substitute the desired code for this symbol. See page 5-6 for code selection. Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Single Key Bolt Interlock Dual Key Bolt Interlock 2 x M5 48.5 (1.90) 15 (0.59) Bolt Dia. 28.5 (1.22) & 30 (1.18) Pitches Code Barrel 20 (0.79) Screws M4 x 8 Boss Dia. Torx Head 15 (0.59) Bolt Dia. Secondary 3.5 (0.13) ➋ 30.5 (1.2) Primary 3.5 (0.13) 57.7 (2.27) Weather Cap Lock Screw (M5) ➋ 29 (1.14) 48.5 (1.90) 15.8 (0.62) 20 (0.79) Boss Dia. 36.3 (1.42) M5 Fixing using Nut Recesses Weather Cap for Front Mntg Lock Screw (M5) 57.7 (2.27) 44.5 (1.75) 44.5 (1.75) 28.5 (1.22) & 30 (1.18) Pitches 15.8 (0.62) 4 x M5 3.5 (0.13) Code Barrel Screws M4 x 8 Torx Head 5.8 (0.22) 25.4 27.4 (1.0) (1.07) 12 (0.47) 30 (1.18) 59.7 (2.35) 65.5 (2.57) Key Trapped Bolt Retracted 25.4 27.4 (1.0) (1.07) 12 (0.47) 30 (1.18) 124 (4.88) Max M5 Fixing using Nut Recesses for Front Mntg ➋ Standard Retracted Projections 0, 3, 6 & 13 (0, 0.11, 0.23 & 0.51) Extension 14 (0.55) 5-21