RoHS Power Chip Low Profile Inductors Dimensions: PCLP20 Inches (mm) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 1v DCR Max. (Ω) Isat (A) PCLP20-4R7M-RC 4.7 20 100 .145 1.6 PCLP20-6R8M-RC 6.8 20 100 .165 1.3 PCLP20-100M-RC 10 20 100 .240 1.0 PCLP20-150M-RC 15 20 100 .300 0.9 PCLP20-220M-RC 22 20 100 .420 0.7 PCLP20-330M-RC 33 20 100 .550 0.6 PCLP20-470M-RC 47 20 100 .765 0.4 PCLP20-680M-RC 68 20 100 1.10 0.4 PCLP20-101M-RC 100 20 100 1.60 0.3 PCLP20-151M-RC 150 20 100 2.50 .25 PCLP20-221M-RC 220 20 100 3.65 .22 PCLP20-331M-RC 330 20 100 4.65 .18 PCLP20-471M-RC 470 20 100 6.75 14 PCLP20-681M-RC 680 20 100 9.15 .12 PCLP20-102M-RC 1000 20 100 14.2 .10 Features • Unshielded SMD low cost design • Designed for high current applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter applications Electrical Inductance Range: 4.7µh to 1000µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: (L/Q) as specified Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment Physical Packaging: 2500 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 (L & Q): HP4192A Impedence Analyzer (DCR): Chen Hwa 502 (IDC): HP4284A with HP42841A or CH1061 with CH301A ALLIED COMPONENTS INTERNATIONAL REVISED 12/30/08 www.alliedcomponents.com