RoHS Power Chip Inductors Dimensions: Allied Part Number Inductance (uH) Tolerance (%) PC1006-220_-RC 22 K, M PC1006-471_-RC 470 Inches (mm) DCR Max. (Ω) Isat (A) 2.52 MHz 0.08 3.8 K, M 1 KHz, 1V 1.421 0.82 Test Freq. PC1006 PC1006-531_-RC 530 K, M 1 KHz, 0.25V 1.7 0.62 PC1006-102_-RC 1000 K, M 1 KHz, 1V 2.9 0.6 PC1006-122_-RC 1200 K, M 1 KHz, 1V 3.5 0.5 PC1006-152_-RC 1500 K, M 1 KHz, 1V 3.8 0.6 PC1006-202_-RC 2000 K, M 1 KHz, 1V 6.6 0.4 PC1006-222_-RC 2200 K, M 1 KHz, 1V 6 0.4 PC1006-602_-RC 6000 K, M 1 KHz, 1V 14 0.27 PC1006-822_-RC 8200 K, M 1 KHz, 1V 50 0.2 *Please insert the letter for desired tolerance: K=±10%, M=±20% All specifications subject to change without notice. Features • Unshielded SMD Power Inductor • High Saturation Current • Suitable for large currents • Ideal for DC-DC converter applications Electrical Inductance Range: 22uH to 8200uH Tolerance: K= ±10%, M=±20% Test Frequency: As noted Operating Temp: -40ºC ~ 105ºC IDC: Current at which Inductance drops 10% of original value without current. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): HP4192A LF Impedence Analyzer (RDC): Chen Hwa 502BC (IDC): HP4284A with HP42841A or Chen Hwa 1061 + 301A Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED15 02/18/2016 www.alliedcomponents.com