revision for dwg # 1PB-AMLx rev ch.no. - - date description original design 40 mm [1.6 in] 2 11/20/2007 40 mm [1.6 in] n40 mm [1.6 in] 1 5 6 7 4 41 mm [1.6 in] 3 max. 6 mm [.25 in] 16 mm [.6 in] 55 mm [2.2 in] 98 mm [3.9 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm revised by Philipp E. This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. * = Operator includes 3x ARW1.2, 1x ARW3.2 ** = Switch Contacts include Contact element washer and two SC24 installation screws, if more than two contact blocks are used, additional screws must be purchased seperatly (SC45, SC65 or SC90) ITEM DESCRIPTION 30 mm Non-Illuminated Mushroom 1* Metal Operatorn with arrows 2* Rubber washer 3 Panel 4** Contact Element washer 5** Switch Contacts 6** Switch Contacts 7** Contact Block Installation Screws titel CAT. NO. AML2 AML4 ARW1.2/ARW3.2 S11 S12 SC25/SC45/SC65/SC90 COLOR Black Red Black Black Red Yellow - MIN. QTY. MAX. QTY. 1 1 1 1 1 4 1 2 1 2 1 2 2 2 30 mm Non-Illuminated Mushroom with Indicated Arrows AMLx (x=color) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/20/2007 drawing no.: 11/20/2007 1PB-AMLx 11/20/2007 scale: rev.: - sheet: 1 of: 1