68-Pin PLCC-to-DIP 64-Pin Motorola MC68HC000 Adapter FEATURES •Allows easy replacement of a difficult-to-find part. GENERAL SPECIFICATIONS •PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick •MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS • Standard thru-hole PCB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 IC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16&17 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 PCB 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 IC 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 52 54 55 56&57 58 59 60 61 62 63 64 65 66 67 68 CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION 1110267-N-P Optional Panalized Form ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18054 Rev. AA