P/N 16-304633-18 20-Pin PLCC-to-16-Pin DIP Adapter for Motorola MC12009 and Others FEATURES •A cost-effective means of upgrading to PLCC package without changing your PCB layout. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221ºF [105ºC] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.28 ±0.003 dia. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED PLCC DIP 1 NC 2 3 4 5 1 2 3 4 6 NC 7 5 16-304633-18 16-304633-18-P for Panelized Version Pinout List 9 10 11 12 13 14 15 16 17 18 19 20 NC NC 6 7 8 9 10 11 12 13 14 15 16 8 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18070 Rev. AA