ZIF PGA Test & Burn-in Socket for Any Footprint on Std 13x13 to 21x21 Grid FEATURES • A strong, metal cam activates the normally closed contacts, preventing dependency on plastic for contact force • The handle can be provided on right or left hand side • Consult factory for special handle requirements •Any footprint accepted on standard 13x13 to 21x21 grid GENERAL SPECIFICATIONS • SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS) • CONTACTS: BeCu 174, 1/2-hard or NiB (Spinodal) • BeCu CONTACT PLATING OPTIONS: “2” 30μ [0.762μ] min. Au per MIL-G-45204 on contact area, 200μ [5.08μ] min. matte Sn per ASTM B545-97 on solder tail, In addition to the standard products shown both over 30μ [0.762μ] min. Ni per QQ-N-290 all over. Consult factory for other CUSTOMIZATION: on this page, Aries specializes in custom design and production. plating options not shown Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • SPINODAL PLATING CONTACT ONLY: “6”: 50μ [1.27μ] min. NiB right to change product general specifications without notice. • HANDLE: Stainless Steel • CONTACT CURRENT RATING: 1 amp • OPERATING TEMPERATURES: -85°F to ORDERING INFORMATION 257°F [-65°C to 125°C] Au plating, -85°F XXX-PXX XXXXX-1 X to 392°F [-65°C to 200°C] NiB (Spinodal) No. of Pins Plating • ACCEPTS LEADS: 0.014-0.026 [0.36Series Designator 2 = Au Contacts, Sn over Nic Tail 0.66] dia., 0.120-0.290 [3.05-7.37] long PRS = Std 6 = NiB (spinodal) Pin Only MOUNTING CONSIDERATIONS PLS = Handle of Left CONSULT FACTORY FOR MINIMUM ORDERING Grid Size & Footprint No. QUANTITY AS WELL AS AVAILABILITY OF THIS •SUGGESTED PCB HOLE SIZE: 0.032 PIN ±0.002 [0.81 ±0.05] dia. Solder Pin Tail •See PCB footprint below •Plugs into standard PGA sockets Grid Size No. of Pins Dim. “C” 12 x 12* 144 1.100 [27.94] 13 x 13 169 1.200 [30.48] 14 x 14* 196 1.300 [33.02] 15 x 15 225 1.400 [35.56] 16 x 16* 256 1.500 [38.10] 17 x 17 289 1.600 [40.64] 18 x 18* 324 1.700 [43.18] 19 x 19 361 1.800 [45.72] 20 x 20* 400 1.900 [48.26] 21 x 21 441 2.000 [50.80] Dim. “A” Dim. “B” Dim. “D” 1.894 [48.10] 1.510 [38.35] 1.675 [42.54] 2.094 [53.20] 1.710 [43.43] 1.875 [47.62] 2.294 [58.26] 1.910 [48.51] 2.075 [52.70] 2.494 [63.34] 2.110 [53.59] 2.275 [57.78] 2.694 [68.42] 2.310 [58.67] 2.475 [62.86] * Top and Right-hand Side Row left out Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10004 Rev. AB 1 of 2 ZIF PGA Test & Burn-in Socket for Any Footprint on Std 13x13 to 21x21 Grid ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS SPECIAL FOOTPRINT INSTRUCTIONS 1. Make a copy of this sheet 2. Fill-in circles for footprint desired using the key below 3. Fill-in the information below, including Series and Plating options. See Ordering Information above 4. Send sheet to Aries for prompt quote TOP VIEW X W V U T S R P N M L K J H G F E D C B A KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 = no pin = pin X = plug hole COMPANY NAME ____________________________ ADDRESS _________________________________ CITY _____________________________________ REQUESTED BY _____________________________ PHONE ___________________________________ DATE ____________________________________ TOTAL NUMBER OF PINS ______________________ SERIES (circle one) PRS PLS PLATING (circle one) 2 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10004 Rev. AB 2 of 2