P/N 64-304121-00 64-Pin 0.5mm TQFP-to-0.8mm QFP Adapter FEATURES •A cost-effective means of upgrading without changing your PCB layout. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides •PINS: 301 full-hard Stainless Steel •PIN PLATING: 200µ [5.08µ] Sn/Pb 90/10 MIL-P-81728 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221ºF [105ºC] CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED ORDERING INFORMATION 64-304121-00 64-304121-00-P = Panelized Version Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18068 Rev. AA