PM300CE SERIES Single, dual and triple output • • • • • • • • • [ 2 YEAR WARRANTY ] SPECIFICATION Encapsulated package 2.5 to 15W modules 230VAC input (115VAC version, see PM300 series) Chassis mounting inserts Terminal strip connections Short circuit protection EN55022, EN55011 conducted emissions level B EN61000-4-2, -3, -4, -5, -6 compliant Meets EN60950 The PM300CE series is an encapsulated, chassis mountable linear AC/DC power module with the CE mark to demonstrate compliance with the Low Voltage Directive for European applications. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 230VAC making the PM300CE series suitable for a wide range of low power chassis applications. The PM300CE series includes 2.5W to 15W modules. Each module has short-circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. There are four threaded inserts in the bottom of each module for convenient chassis mounting. The PM300CE design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage accuracy ±1.0%, max. Line regulation See table on facing page Load regulation See table on facing page Temperature coefficient Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022 EN55022 EN61000-4-2, EN61000-4-2, EN61000-4-5, EN61000-4-4, EN61000-4-3, EN61000-4-6, level level level level level level 3 4 3 3 3 3 Perf. Perf. Perf. Perf. Perf. Perf. Level B Level B criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 ±0.02%/°C GENERAL SPECIFICATIONS Overvoltage protection (See Note 4) 5V outputs only 6.2V typical Efficiency Output power limit 130% to 200% FL typ. Short circuit protection 100% to 200% FL Input frequency range Safety ground leakage current Isolation voltage 3000VAC Isolation capacitance 50pF Approvals and standards (See Note 5) INPUT SPECIFICATIONS Input voltage range 40% typical Meets EN60950 230VAC ±10% (See Note 2) Case material UL94V-0 Non-conductive black plastic Weight Case C1 Case C2 567g (20.02oz) 816g (28.80oz) 47Hz to 400Hz <3.5mA @ 50Hz MTBF (See Note 3) 710,000 hours ENVIRONMENTAL SPECIFICATIONS PAGE 1 Temperature Operating ambient –25°C to +71°C Non-operating amb. –25°C to +71°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection cooled Relative Humidity Non-condensing 20% to 95% RH ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 2.5-15W AC 2.5 to 15 Watt AC/DC encapsulated modules OUTPUT VOLTAGE OUTPUT CURRENT OVP REGULATION LINE LOAD (4) RIPPLE AND NOISE CASE AVAILABLE MODELS SINGLE OUTPUT 5VDC 500mA Yes ±.05% ±0.10% 2mV rms C1 PM334CE 5VDC 1000mA Yes ±.05% ±0.15% 2mV rms C1 PM342CE 5VDC 2000mA Yes ±.05% ±0.15% 2mV rms C2 PM345CE DUAL OUTPUT ±12VDC ±240mA No ±0.05% ±0.05% 1mV rms C1 PM337CE ±12VDC ±400mA No ±0.05% ±0.05% 1mV rms C2 PM397CE ±15VDC ±100mA No ±0.05% ±0.05% 1mV rms C1 PM302CE ±15VDC ±200mA No ±0.05% ±0.05% 1mV rms C1 PM365CE ±15VDC ±350mA No ±0.05% ±0.05% 1mV rms C2 PM301CE ±15VDC ±500mA No ±0.05% ±0.05% 1mV rms C2 PM396CE TRIPLE OUTPUT (1) 5V/±12VDC 500/±120mA Yes ±0.05% ±0.1%/±0.05% 1mV rms C1 PM391CE 5V/±15VDC 500/±100mA Yes ±0.05% ±0.1%/±0.05% 1mV rms C1 PM390CE 5V/±15VDC 1000/±150mA Yes ±0.20% ±0.1%/±0.02% 1.0/0.5mV rms C2 PM393CE 5V/±12VDC 1000/±150mA Yes ±0.20% ±0.1%/±0.02% 1.0/0.5mV rms C2 PM392CE Note 1 2 3 4 5 Triple output models only: the 5V output common is isolated from the ±12VDC or ±15VDC common. Some units should be derated for operation at 400Hz. Please contact the factory for details. M.T.B.F. figures are based on actual product performance. Consult factory for details. Triple output models only: overvoltage protection is only available on the 5V outputs. All models are only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. CASE C 0.75 (19.1) INSERTS 4.40 THREAD 0.125 (3.2) DEEP 2.50 (63.5) Single Output Models 0.75 (19.1) Dual Output Models Triple Output Models 5.40 BH Screws 4.00 (101.6) AC AC AC AC AC AC – 5V OUT NC NC NC – OUT + 5V OUT – 12V OUT – 15V OUT COM COM + OUT + OUT COM + 12V OUT + 15V OUT C1 C2 2.00 (50.8) 2.70 (68.6) 0.35 (8.9) 1.45 (36.8) 2.00 (50.8) ALL DIMENSIONS IN INCHES (mm) http://www.artesyn.com PAGE 2 DS_PM300CE_19980401.PDF Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.