20 mm (0.8 inch) General Purpose Seven Segment Displays Technical Data HDSP-815E HDSP-816E HDSP-815G HDSP-816G Features Applications • Industry Standard Size • Industry Standard Pin-Out 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Choice of Colors Red, Green • Mitered Font Mitered Corners on Segments • Gray Face Paint Gray Package Gives Optimum Contrast • ± 50° Viewing Angle • Design Flexibility Common Anode or Common Cathode • Categorized for Luminous Intensity • Suitable for Indoor Use • Not Recommended for Industrial Applications, i.e. Operating Temperatures Requirements Exceeding 85°C or Below -25°C[1] • Extreme Temperature Cycling Not Recommended[2] Description These 20 mm (0.8 inch) displays use industry standard size and pin-out. The devices are available as either common anode or common cathode. Available in either red or green colors, these gray-faced displays are suitable for indoor use. No color binning is offered for these parts. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with AQL of 0.065% for functional and visual/ cosmetic rejects. Devices HER HDSP815E 816E Green HDSP815G 816G Description Common Anode Right Hand Decimal Common Cathode Right Hand Decimal Notes: 1. For industrial applications, it is recommended to use HDSP-3901/3903/8601/8603. 2. For details, please contact your local Agilent Technologies sales office or an authorized distributor. 2 Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options [1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] E: High Efficiency Red G: Green Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions 11.07 (0.436) LUMINOUS INTENSITY CATEGORY 8° 4.60 (0.181) 16 1 20.32 (0.800) 27.69 ± 0.25 (1.090 ± 0.010) 6 HDSP-XXXX XYY Z XXXX 13.08 (0.514) 1.70 (0.067) DIA. 0.50 (0.020) 2.54 x 7 = 17.78 (0.100 x 7 = 0.700) 9 UNUSED DP 1.25 (0.049) RHDP DATE CODE 8.20 (0.323) SIDE VIEW C L C L COUNTRY OF ORIGIN CHARACTER PACKAGE FRONT VIEW NOTES: 1. DIMENSIONS IN MILLIMETERS AND (INCHES). 2. TOLERANCE IS 0.25 mm (0.010 INCH) UNLESS OTHERWISE STATED. 19.96 (0.786) 8.38 (0.330) 4.8 ± 0.50 (0.189 ± 0.020) 15.24 (0.600) END VIEW 4 Internal Circuit Diagram COMMON ANODE PIN a 1 f 2 b 3 g 4 5 c e 6 DP 7 8 d COMMON ANODE 16 1 15 2 14 3 13 4 12 5 11 6 10 7 9 8 a 16 f 15 b 14 g 13 12 c e 11 DP d COMMON CATHODE 10 9 FUNCTION COMMON CATHODE PIN FUNCTION 1 2 3 4 CATHODE A CATHODE F COMMON ANODE CATHODE E 1 2 3 4 ANODE A ANODE F COMMON CATHODE ANODE E 5 6 7 8 9 10 COMMON ANODE NO CONNECTION NO PIN NO PIN CATHODE RHDP CATHODE D 5 6 7 8 9 10 COMMON CATHODE NO CONNECTION NO PIN NO PIN ANODE RHDP ANODE D 11 12 COMMON ANODE CATHODE C 11 12 COMMON CATHODE ANODE C 13 14 15 CATHODE G CATHODE B NO PIN 13 14 15 ANODE G 16 COMMON ANODE 16 ANODE B NO PIN COMMON CATHODE 5 Absolute Maximum Ratings at TA=25°C Parameter Average Power per Segment or DP Peak Forward Current per Segment or DP (1/10 Duty Cycle, 0.1 ms Pulse Width) DC Forward Current per Segment or DP [1] Reverse Voltage per Segment or DP Operating Temperature Storage Temperature Lead Solder Temperature for 3 Seconds[2] (1.6 mm [0.063 in.] Below Seating Plane) High Efficiency Red HDSP-815E HDSP-816E 62.5 100 Green HDSP-815G HDSP-816G 65 90 Units MW mA 25 3 -25 to +85 -25 to +85 260 25 3 -25 to +85 -25 to +85 260 mA V °C °C °C Notes: 1. Derate above 25°C at 0.33 mA/°C. 2. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 5 seconds. Optical/Electrical Characteristics at TA=25 °C High Efficiency Red Devices HDSP- 815E 816E Parameter Luminous Intensity/Segment (Segment Average)[1,2] Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF/Segment or DP Symbol Iv Parameter Luminous Intensity/Segment (Segment Average)[1,2] Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] Temperature Coefficient of VF/Segment or DP Symbol Iv Min. 2.3 VF lPEAK ld VR DVF/°C 3.0 Typ. 4.8 2.1 635 626 25 -2 Test Max. Units Conditions mcd IF = 20 mA 3.0 V IF = 20 mA nm nm V IR = 100 µA mV/°C Green Devices HDSP- 815G 816G VF lPEAK ld VR DVF/°C Min. 1.5 3.0 Typ. 3.3 2.1 566 571 50 -2 Test Max. Units Conditions mcd IF = 20 mA 2.6 V IF = 20 mA nm nm V IR = 100 µA mV/°C Notes: 1. Case temperature of the device immediately prior to the intensity measurement is 25°C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 40 35 RθJA = 525°C/W 30 25 20 GREEN, HER 15 10 5 0 10 20 30 40 50 60 70 80 90 100 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum Allowable DC Current vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 2.00 IF – FORWARD CURRENT PER SEGMENT – mA DC MAX – MAXIMUM DC CURRENT PER SEGMENT – mA 6 100 80 60 40 GREEN 20 HER 0 0 2 1 4 5 Figure 2. Forward Current vs. Forward Voltage. Intensity Bin Limits (mcd at 20 mA) HER/Green 1.75 1.50 Green 1.25 1.00 0.75 HER GREEN 0.50 0.25 0 3 VF – FORWARD VOLTAGE 0 10 20 30 40 HER Bin Name N Min.[1] NA Max.[1] NA Min.[1] Max.[1] 5.31 7.57 P 7.57 10.78 7.57 10.78 Q 10.78 15.10 10.78 15.10 R 15.10 21.58 NA NA IF – FORWARD CURRENT PER SEGMENT – mA Color Categories Figure 3. Relative Luminous Intensity vs. DC Forward Current. Dominant Wavelength (nm) Color Bin Min. Max. Green 1 2 569.00 572.00 572.00 575.00 Note: 1. All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for further clarification/information. 7 6 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 20 mm (0.8 inch) General Purpose Seven Segment Display. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-4353EN September 24, 2002 5988-7999EN