AZ822 SUBMINIATURE DIP RELAY FEATURES • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Life expectancy to 10 million operations Standard PC 0.1" grid terminal spacing Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 220 VDC or 250 VAC UL Rating: 1 A at 24 VDC 0.5 A at 120 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 108 5 x 105 at 1 A 30 VDC Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Capacitance (max.) Contact to contact: 1.2 pF Contact set to contact set: 1.6 pF Contact to coil: 1.5 pF Bounce (typical) At 10 mA contact current 2 ms at operate N.O. side 3 ms at operate N.C. side Material Silver palladium, gold clad Dielectric Strength 1000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms contact to contact 1000 Vrms between contact sets Resistance < 50 milliohms initially Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -55°C (-67°F) to 90°C (194°F) -55°C (-67°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester (UL94 V-0) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4.5 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 98 mW - Standard coils 74 mW - Sensitive coils 0.94 W at 20°C (68°F) 15°C (27°F) at nominal coil voltage Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Relay adjustment may be affected if undue pressure is exerted on relay case. 4. Specifications subject to change without notice. 3/3/04W AZ822 RELAY ORDERING DATA COIL SPECIFICATIONS - STANDARD Coil Resistance ± 10% 45 ORDER NUMBER Nominal Coil VDC 3 Max. Continuous VDC 6.5 Must Operate VDC 2.1 5 10.8 125 3.5 AZ822–2C–5DE 6 9 13.0 19.5 180 405 4.2 6.3 AZ822–2C–6DE AZ822–2C–9DE 12 26.5 720 8.4 AZ822–2C–12DE AZ822–2C–3DE 24 52.9 2880 16.8 AZ822–2C–24DE 48 103.9 11520 33.6 AZ822–2C–48DE Must Operate VDC 2.1 ORDER NUMBER COIL SPECIFICATIONS - SENSITIVE Nominal Coil VDC 3 Max. Continuous VDC 7.5 Coil Resistance ± 10% 60 5 12.5 167 3.5 AZ822–2C–5DSE 6 9 15.0 22.5 240 540 4.2 6.3 AZ822–2C–6DSE AZ822–2C–9DSE 12 30.0 960 8.4 AZ822–2C–12DSE 18 40.0 1620 12.6 AZ822–2C–18DSE 24 52.9 2880 16.8 AZ822–2C–24DSE 48 84.9 7680 33.6 AZ822–2C–48DSE AZ822–2C–3DSE MECHANICAL DATA .386 (9.8) .787 (20) .138 (3.5) .015 (0.38) .472 (12) .044 (1.11) .300 (7.61) .200 (5.07) .200 (5.07) PC BOARD LAYOUT 0.03 DIA (0.8) (8 HOLES) .010 ± .005 (0.25 ± 0.13) TYP (.020 ± .005) (0.5 ± 0.13) TYP WIRING DIAGRAM .047 (1.2) REF 1 4 6 8 16 13 11 9 .047 (1.2) REF 0.1 (2.54) Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/3/04W