AZ941 MINIATURE PC BOARD RELAY FEATURES • • • • • • • Contacts rated at 3, 5, 10 or 16 Amps DC coils to 48 V Extremely low cost Life expectancy to 10 million operations Epoxy sealed UL, CUR file E44211; VDE 10056 5 Class F available CONTACTS Arrangement Ratings Light Duty Medium Duty Heavy Duty Extra Heavy Duty SPDT (1 Form C) Form A available upon request Resistive load Max. switched power: 90 W or 750 VA Max. switched current: 3 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 3 A at 30 VDC or 250 VAC Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC or 125 VAC 1/ 10 HP @ 125 VAC Max. switched power: 300 W or 2500 VA Max. switched current: 12 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC 12 A at 125 VAC 1/ HP @ 125 VAC 4 1/ HP @ 250 VAC 2 Max. switched Max. switched Max. switched UL Rating: 16 10 power: 300 W or 4000 VA current: 16 A voltage: 150* VDC or 300 VAC A at 125 VAC A at 30 VDC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1x107 1 x 105 at 12 A 120 VAC Res. Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 750 Vrms contact to contact Meets FCC part 68.302 1500 V lightning surge Meets FCC part 68.304 1000 V dielectric Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Max. Solder Time 5 seconds Material Silver cadmium oxide Max. Solvent Temp. 80°C (176°F) Resistance < 100 milliohms initially Max. Immersion Time 30 seconds Weight 13 grams COIL Power At Pickup Voltage (typical) 230 mW Max Continuous Dissipation 1.1 W 20°C (68°F) ambient .86 W 40°C (104°F) ambient Temperature Rise 27°C (49°F) nominal coil voltage Temperature Max. 105°C (221°F) Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F ZETTLER NOTES 1. 2. 3. 4. 5 All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Specifications subject to change without notice. Only AZ941-1CT unsealed version is VDE approved at 5A, 250 VAC. electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08 AZ941 RELAY ORDERING DATA STANDARD RELAYS: Light Duty Type (3 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.9 ORDER NUMBER Coil Resistance ±10% 70 Must Operate VDC 4.0 Unsealed Sealed AZ941–1C–5D AZ941–1C–5DE 6 10.6 100 4.8 AZ941–1C–6D AZ941–1C–6DE 12 21.2 400 9.6 AZ941–1C–12D AZ941–1C–12DE 24 42.5 1,600 19.2 AZ941–1C–24D AZ941–1C–24DE 48 85.0 6,400 38.4 AZ941–1C–48D AZ941–1C–48DE STANDARD RELAYS: Medium Duty Type (5 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.9 ORDER NUMBER Coil Resistance ±10% 70 Must Operate VDC 4.0 Unsealed Sealed AZ941–1CH–5D AZ941–1CH–5DE 6 10.6 100 4.8 AZ941–1CH–6D AZ941–1CH–6DE 12 21.2 400 9.6 AZ941–1CH–12D AZ941–1CH–12DE 24 42.5 1,600 19.2 AZ941–1CH–24D AZ941–1CH–24DE 48 85.0 6,400 38.4 AZ941–1CH–48D AZ941–1CH–48DE STANDARD RELAYS: Heavy Duty Type (12 Amp Contact) COIL SPECIFICATIONS ORDER NUMBER Nominal Coil VDC 5 Max. Continuous VDC 8.9 Coil Resistance ±10% 70 Must Operate VDC 4.0 AZ941–1CT–5D AZ941–1CT–5DE 6 10.6 100 4.8 AZ941–1CT–6D AZ941–1CT–6DE 12 21.2 400 9.6 AZ941–1CT–12D AZ941–1CT–12DE 24 42.5 1,600 19.2 AZ941–1CT–24D AZ941–1CT–24DE 48 85.0 6,400 38.4 AZ941–1CT–48D AZ941–1CT–48DE Unsealed Sealed STANDARD RELAYS: Extra Heavy Duty Type (16 Amp Contact) COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Max. Continuous VDC 8.9 Coil Resistance ±10% 70 Must Operate VDC 4.0 AZ941–1CW–5DB AZ941–1CW–5DEB 6 10.6 100 4.8 AZ941–1CW–6DB AZ941–1CW–6DEB 12 21.2 400 9.6 AZ941–1CW–12DB AZ941–1CW–12DEB 24 42.5 1,600 19.2 AZ941–1CW–24DB AZ941–1CW–24DEB 6,400 38.4 AZ941–1CW–48DB AZ941–1CW–48DEB 48 85.0 * Add suffix “F” in place of “B” to indicate class F. Unsealed Sealed MECHANICAL DATA PC BOARD LAYOUT .082 (2.1) .89 (22.5) .01 (0.3) .65 (16.5) .472 (12.0) .65 (16.5) .01 (0.3) .040 (1.0) 5 PLACES .138 (3.5) .089 (2.3) .078 (2.0) WIRING DIAGRAM .05 5 HOLES (1.3) .089 (2.3) .480 (12.2) Viewed toward terminals 2 3 5 4 1 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08