AZ9571 SUBMINIATURE PC BOARD RELAY FEATURES • • • • Subminiature size for high density packaging Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 96 mW pickup UL, CUR E43203 GENERAL DATA CONTACTS Life Expectancy Mechanical Electrical Minimum operations 10 million operations 1 x 105 at 0.5A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Arrangement SPDT (1 Form C) Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Ratings Resistive load: Max. switched power: 30 W or 62.5 VA Max. switched current: 1 A Max. switched voltage: 60 VDC or 125 VAC UL Rating: 1 A at 30 VDC 0.3 A at 60 VDC 0.5 A at 125 VAC Capacitance Coil to contact: 7.0 pF Contact to contact: 7.0 pF Bounce (typical) At 10 mA contact current 2 ms at operate 8 ms at release Material Silver gold clad Resistance < 100 milliohms initially (6 V 1 A method) COIL Power At Pickup Voltage (typical) Standard coil:128 mW Sensitive coil: 96 mW Max. Continuous Dissipation .5 W at 20°C (68°F) ambient Temperature Rise Standard: 33°C (59°F) at nominal coil voltage Sensitive: 25°C (45°F) at nominal coil voltage Temperature Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) Storage -25°C (-13°F) to 105°C (221°F) Vibration 3.3 mm DA at 10–55 Hz Shock 10 g Functional, 100g destructive Enclosure P.E.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Immersion Time 30 seconds Weight 2.2 grams Max. 105°C (221°F) NOTES 1. 2. 3. 4. Dielectric Strength 1000 Vrms coil to contact (at sea level for 1 min.) 400 Vrms between open contacts All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Other coil resistances and sensitivities available upon request. Specifications subject to change without notice. 4/02/09W AZ9571 RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Nominal Coil VDC 3 Must. Operate VDC 2.4 Max. Continuous VDC 4.5 Coil Resistance ±10% 45.0 ORDER NUMBER AZ9571-1C-3DE 5 4.0 7.5 125 AZ9571-1C-5DE 6 4.8 9.0 180 AZ9571-1C-6DE 9 7.2 13.5 405 AZ9571-1C-9DE 12 9.6 18 720 AZ9571-1C-12DE 24 19.2 36 2880 AZ9571-1C-24DE COIL SPECIFICATIONS: SENSITIVE COIL Nominal Coil VDC 3 Must. Operate VDC 2.4 Max. Continuous VDC 6.0 Coil Resistance ±10% 60.0 ORDER NUMBER AZ9571-1C-3DSE 5 4.0 10.0 167 AZ9571-1C-5DSE 6 4.8 12.0 240 AZ9571-1C-6DSE 9 7.2 18.0 540 AZ9571-1C-9DSE 12 9.6 24.0 960 AZ9571-1C-12DSE 24 19.2 48.0 3840 AZ9571-1C-24DSE MECHANICAL DATA .504MAX [12.8] .307MAX [7.8] PC BOARD LAYOUT .300 [7.62] .100 [2.54] .406MAX [10.3] .200 [5.08] Ø [Ø1.0] .020 [0.5] .138 [3.5] .020 [0.5] .100 [2.54] .300 [7.62] WIRING DIAGRAM 2 6 9 5 .200 [5.08] 1 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 4/02/09W