BOSER BPC-6169

BPC-6169
15” TFT Industrial Panel PC
with PCI-ISA Bus SBC &
three PCI Slots
‧15” TFT Panel‧
‧Touch Screen‧
‧BS-669 VGA to Panel Transfer Card‧
‧HS-6237 SBC‧
‧HPS-4S Backplane‧
‧250W Power Supply‧
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of
this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does it
make any commitment to update the information contained herein.
TTrraaddeem
maarrkkss
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are mentioned
for identification purposes only, and may be trademarks and/or registered trademarks
of their respective companies or owners.
© Copyright 2005 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.1, September 16, 2005
Table of Contents
Chapter 1 Introduction……………………………….1
1.1
1.2
1.3
1.4
1.5
Major Features ...................................................2
Specifications ....................................................2
Backplanes.........................................................3
Control Keys ......................................................4
Dimensions ........................................................4
Chapter 2 Unpackin…………………………………..5
2.1
2.2
Opening the Delivery Package .........................5
Inspection...........................................................5
Chapter 3 Hardware Installation……………………7
3.1
3.2
Open the Cover and Remove SBC ...................7
About Drive Bay...............................................10
Chapter 4 Touch Screen Driver Installation………13
4.1
4.2
Touch Screen Driver Installation....................13
Driver Functions ..............................................18
Safety Instructions
The safety recommendations outlined in this section are to be read,
understood and followed before operating the product. Keep this
information in a safe place for future reference. Failure to comply with
any of the following safety procedures could result in serious hazard.
Do not operate product for any purposes other than its intended use.
This product is intended for indoor use only.
Do not operate product if power cord is damaged in anyway.
Do not insert objects into openings.
Do not immerse product in water or permit liquids to spill inside.
Turn off power when unattended or not in use. Unplug product before moving it or
when it is not in use for an extended period of time. The socket-outlet shall be
installed near the equipment and shall be easily accessible.
Do not alter or extend electric plug. Plug is configured for appropriate electrical
supply.
Do not overload electrical outlets beyond their capacity as this can result in a fire.
Life Expectancy of Constituent Parts
This section describes the life expectancy of constituent parts (backlight,
power supply, internal cooling fan and touch screen) which make up to
BPC-6169.
TFT Display Backlight
Display brightness decreases over time with use. The expected operating lifetime
of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming
continuous lit state at 25 degrees C). Actual lifetime before replacement is about
30,000 hours, although this depends on operating conditions.
Power Supply
Assuming continuous use at 25 degrees C, the expected life of the power supply
is approximately 50,000 hours. This may be lower given use at higher
temperatures.
Internal Cooling Fan
The BPC-6169 is equipped with a built-in +12V cooling fan, the life expectancy of
this fan under continuous use is approximately 50,000 hours (average time
before the rate of rotation is reduced by approximately 30%). Although the rate of
rotation will continue to go down, the fan should not just suddenly stop.
Touch Screen
The operating lifetime of the touch screen is approximately 1 million operations
(as tested by mechanical manipulation under 100g of force at a rate of two
presses per second).
This page intentionally left blank.
Chapter 1
Introduction
The BPC-6169 is an industrial grade Panel PC which provides
convenient expandability through 32-bit PCI slot. The rear design of
BPC-6169 enhanced the disassembly process when required. It also
supports various mounting solution like wall mount, panel mount or
desktop for different application.
The BPC-6169 has a 15” display and a touch screen that operate
under all types of working environment. It offers OSD (On Screen
Display) on the front panel for user’s operation.
The BPC-6169 support various types of BOSER’s half-size SBC,
ranging from 586 to Pentium 4 models, is compatible with BPC-6169. It
also comes with a reliable power supply and one 8cm high efficient
cooling fan to enhance system stability.
The BPC-6169 is IBM PC/AT compatible and can draw from a large
body of hardware and software resources worldwide.
250W AT power supply with NEMKO, IEC, UL, CE, CSA, TUV
approved
The user can select the operating system he wants to use just like an
ordinary personal computer. An operating system such an MS-DOS,
Windows can be selected to suit the application.
The BPC-6169 features an all-in-one flat display.
1
Keyboard less operations are possible through the use of a touch
screen. In addition to a watchdog timer indispensable in FA
applications.
You can select from a broad range of variations to arrive at the optimum
configuration for your application and budget.
1.1
Major Features
The BPC-6169 comes with the following features:
Aluminum front panel
15” TFT color panel display
Built-in touch screen, BS-669, OSD, HS-6237 SBC, HPS-4S, 250W P/S
C&T 69000 display controller
Intel 82559ER LAN controller
Two COM, one parallel, two USB, PC/104, three PCI expansion slots
Two 3.5” HDD/FDD, and one 5.25” CD-ROM spaces
DiskOnChip socket supporting memory sizes of up to 288MB
One 8cm ball bearing cooling fan
Provides Function Keys (optional)
1.2
Specifications
System Board: HS-6237 industrial PCI-ISA Bus SBC
CPU: Socket 370 for Intel Celeron/Coppermine 500~850MHz CPU
Memory: Two DIMM sockets supporting up to 512MB
Backplane: HPS-4S backplane
PCI Slot: Three PCI expansion slots
OSD: BS-669 VGA to Panel transfer card, supporting OSD function
Function Keys: Provides Function Keys in the front panel (optional)
Touch Screen: 15” resistive touch screen
VGA: C&T 69000 display controller
LAN: Intel 82559ER 10/100 Based LAN
HDD/FDD/CD-ROM: Two 3.5” HDD/FDD and one 5.25” CD-ROM
spaces
Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
Serial Port: Two serial ports
PC/104: PC/104 Bus connector for 16-bit ISA Bus
USB: Two USB ports
Keyboard: PS/2 6-pin Mini DIN
Mouse: PS/2 6-pin Mini DIN
2
DiskOnChip: DiskOnChip socket supporting memory sizes of up to
288MB
BIOS: Award PnP Flash BIOS
Watchdog Timer: Sets 1/2/10/20/110/220 seconds activity trigger with
Reset or NMI
Thermal System: One 8cm ball bearing cooling fan
Power Supply: 250W AT power supply
Temperature: 0~45°C (operating); -20~+70°C (storage)
Dimensions: 43.0(L) x 15.2(W) x 32.1(H) cm
1.3
Backplanes
All backplanes designed by 4-layer PCB with Ground and Power
planes for reduced noise and make lower impedance. All backplanes
come with complete test.
Part Number
HPS-4S
Number of slots Part Number
ISA
PCI-ISA
PCI
0
1
3
Size (cm)
17.526 x 9.843
3
1.4
Control Keys
BPC-6169 provides Function Keys and OSD Control Keys.
Function Keys Define (optional)
OSD Control Keys Define (optional)
Menu: Menu/Item select
Down: Cursor down control
Up: Cursor up control
Return: Return to menu
1.5
4
Dimensions
Chapter 2
Unpacking
2.1
Opening the Delivery Package
The BPC-6169 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2
Inspection
After unpacking the Panel PC, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The BPC-6169 delivery package
contains the following items:
BPC-6169 Panel PC x 1
Power Cable x 1
Touch Screen Drive Diskette x 1 (optional)
Drive CD Disk x 1
SBC Manual x 1
User’s Manual x 1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.
5
This page intentionally left blank.
6
Chapter 3
Hardware Installation
This chapter tells how to install components into the Panel PC system.
External Interface please refers to SBC’s manual.
3.1
1.
Open the Cover and Remove SBC
Please loose screw and open the cover.
7
8
2.
Remove the SBC.
9
3.2
1.
10
About Drive Bay
Please loose screw and remove the FDD/CD-ROM cover.
2.
Install a FDD or 3.5” HDD drive.
11
3.
12
Install a 5.25” CD-ROM drive
Chapter 4
Touch Screen Driver Installation
This chapter contains the detailed information of Touch Screen driver
installation procedures. The utility disk that came with the delivery
package contains an auto-run program that invokes the installation
programs for the Touch Screen driver. The following sections describe
the installation procedures of driver based on Win 2000 operating
systems. It is recommended that you install the drivers matching the
sections listed in this chapter.
4.1
Touch Screen Driver Installation
4.1.1 Installing Touch Screen Driver in Win 95 and 98
1.
2.
Insert Utility CD Disk to your CD ROM drive. The main menu will
pop up as shown below.
The screen displays copying “installation wizard” and “PenMount
Utilities Installation” screen plus “welcome” message appear,
click “Next”.
13
3.
The next screen is “Software License Agreement”, select “I
accept” and click “Next”.
4.
The next screen is “Ready to Install the Program”, click “Install”.
14
5.
Once the Install Shield Wizard finishes updating your system, it
will prompt you to restart the computer. Click “Finish” to exit the
wizard.
15
4.1.2 Installing Touch Screen Driver in Win 2000
1.
2.
3.
16
Insert Utility CD Disk to your CD ROM drive. The main menu will
pop up as shown below.
The screen displays copying “installation wizard” and “PenMount
Utilities Installation” screen plus “welcome” message appear,
click “Next”.
The next screen is “Software License Agreement”, select “I
accept” and click “Next”.
4.
The next screen is “Ready to Install the Program”, click “Install”.
5.
Once the Install Shield Wizard finishes updating your system, it
will prompt you to restart the computer. Click “Finish” to exit the
wizard.
17
4.2 Driver Functions
4.2.1 PenMount Control Panel
Calibrate
To adjust the display with touch screen, click “Calibration” and
follow the calibrate point to do calibration, there are five points on
screen for calibration.
18
Draw
Test or demonstrate PenMount touch screen operation, also the
touch location is shown on the display, touch “DRAW” to start.
About
It shows information about PenMount controller and this driver.
19
4.2.2 PenMount Monitor
The PenMount monitor icon is shown in the menu bar of Windows 2000
system when turn on PenMount monitor from PenMount Utilities.
There are several functions on PenMount monitor:
Right Click Button
When select this function, there is a mouse icon shown in the
right-button place of screen. It shows ‘left button’ being as default
for normal use, touch this mouse icon to change the next touch to
be ‘Right Button’ function. After one touch, the mouse icon will
change to ‘Left Button’ automatically. If user needs to use right
button again, user has to touch the mouse icon again for changing
the button function.
Beep
Turn on or off beep sound.
Exit
Close the PenMount Monitor function.
20