BPC-3600 6.4” Industrial Panel PC with MainBoard, CF, TV-Out, Touch Screen, Power Adapter Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd. assumes no responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein. TTrraaddeem maarrkkss BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. © Copyright 2007 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.2, October 13, 2010 Table of Contents Chapter 1 General Description ..................................1 1.1 Major Features ....................................................................... 2 1.2 Specifications ........................................................................ 2 1.4 Dimensions ............................................................................ 5 Chapter 2 Unpacking ..................................................5 2.1 Opening the Delivery Package............................................. 5 2.2 Inspection............................................................................... 5 Chapter 3 3.1 3.2 3.3 3.5 Hardware Installation ..............................7 SBC Installation ..................................................................... 7 HDD Installation..................................................................... 8 Back Cover Installation....................................................... 10 Wall Mount Kit...................................................................... 11 Chapter 4 Touch Screen Driver Installation ..........13 4.1 Touch Screen Driver Installation ....................................... 13 4.2 Driver Functions .................................................................. 18 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Product Model Series: This Product Complies With: Information Technology Equipment BPC-3600 EN55022: Class A for Radiated emissions EN50082-2: Heavy Industrial EMC Immunity We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Manufacturer: BOSER TECHNOLOGY CO., LTD. Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious hazard. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway Do not insert objects into openings Do not immerse the product in water or permit liquids to spill inside Turn off power when unattended or not in use. Unplug the product before moving it or when it is not in use for an extended period of time. The socket-outlet shall be installed near the equipment and shall be easily accessible Do not alter or extend electric plug. Plug is configured for appropriate electrical supply Do not overload electrical outlets beyond their capacity as this can result in a fire NOTE: DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS. Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPC-3600 series. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C). Actual lifetime before replacement is about 30,000 hours, although this depends on operating conditions. Touch Screen The operating lifetime of the touch screen is approximately 1 million operations (as tested by mechanical manipulation under 100g of force at a rate of two presses per second) Chapter 1 General Description The BPC-3600 series is an industrial Panel PC. The rear design of BPC-3600 series enhances the disassembly process when required. It also supports various mounting solution like wall-mount, panel-mount, or desktop for different application. The BPC-3600 series has a 6.4” display and an option touch screen that operate under all types of working environment. This model can accommodate BOSER’s HS-2605 or HS-2615 embedded engine board. The BPC-3600 series provides CF, CRT, TV-Out, TJ-45, Line In, Audio Out, KB/MS, COM and USB ports. z The BPC-3600 series is IBM PC/AT compatible and can draw from a large body of hardware and software resources worldwide. z The user can select the operating system he wants to use just like an ordinary personal computer. An operating system such an MS-DOS, Windows can be selected to suit the application. z The BPC-3600 series features an all-in-one flat display. z Users can use a touch screen mostly instead of a keyboard and a watchdog timer is indispensable in FA applications. You can select from a broad range of variations to arrive at the optimum configuration for your application and budget. 1 1.1 Major Features The BPC-3600 series comes with the following features: ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ 1.2 Aluminum front panel design 6.4” high brightness TFT color panel display BPC-3600-E w/touch screen, HS-2615/VIA V4 Eden 1GHz CPU, 12V DC adapter, CF, 3 x COM, 4 x USB2.0 BPC-3600-C1 w/touch screen, HS-2605/VIA Eden 667MHz CPU, +5V/+12V power adapter, CF, 3 x COM, 2 x USB, TV-Out Onboard graphics, Ethernet, audio controller 1 x 2.5” HDD space 1 x 4cm ball bearing cooling fan Option for open frame type Specifications z System BPC-3600-E SBC Model 2 HS-2615 CPU VIA V4 Eden 1GHz CPU BIOS Award PnP Flash BIOS System Chipset: VIA CX700(M) System Memory 1 x 200-pin SO-DIMM socket DDR2 533MHz up to 1GB Display Chipset VIA CX700(M) Audio Chipset VIA VT1708A Ethernet Chipset Dual RealTek RTL8139DL 10/100 Mbps LAN Drive Bay 1 x 2.5” HDD space Storage 1 x Type II CF socket 01. 02. 03. 04. 05. Watchdog Timer Software programmable time-out intervals from 1~255 sec. or 1~255 min. External I/O 3 x COM, Line Out, MIC In, 4 x USB2.0, 2 x LAN, CF, PS/2 KB/MS, VGA Brightness DC Adapter In Main Power ON/OFF COM 3 COM 2 06. 07. 08. 09. 10. COM 1 Line Out MIC In Reset Button USB2.0 x 2 11. 12. 13. 14. 15. LAN x 2 CF KB/MS VGA USB2.0 x 2 BPC-3600-C SBC Model HS-2605 CPU VIA Eden 500/667MHz CPU (500MHz fanless) BIOS AMI PnP Flash BIOS System Chipset: VIA VT8606/VT82C686B System Memory 1 x 144-pin SO-DIMM socket up to 512MB SDRAM Display Chipset VIA VT8606 Audio Chipset VIA VT1612A Ethernet Chipset RealTek RTL8100 10/100 Mbps LAN Drive Bay 1 x 2.5” HDD space Storage 1 x Type I CF socket Watchdog Timer Sets 1/2/10/20/110/220 seconds activity trigger with NMI or Reset 3 01. 02. 03. 04. 05. External I/O MIC In, Line Out, 3 x COM, TV-Out, LAN, PS/2 KB/MS, VGA, 2 x USB, CF Brightness DC Adapter In Main Power ON/OFF MIC In Line Out 06. 07. 08. 09. 10. Reset Button COM 3 COM 2 COM 1 TV-Out z Display LCD Size 6.4” Max Resolution 640 x 480 pixels LCD Color 262,144 colors Pixel Pitch (mm) 0.2025 x 0.203 Touch Screen 6.4” resistive z I/O Interface 4 Thermal Solution 1 x 4cm ball bearing cooling fan Dimensions (LxHxW) 23.3 x 16.4 x 6.8cm Cut Out Size (LxH) 21.8 x 13.8 cm Operation/Storage Temperature 0~+45 degrees C/-20~+70 degrees C EMC FCC/CE Front Panel Protection IP65 compliance Power Adapter 12V DC in 84W adapter (BPC-3600-E) 5V/12V DC in 42W adapter (BPC-3600-C) 11. 12. 13. 14. 15. LAN KB/MS VGA USB x 2 CF 1.4 Dimensions 5 This page intentionally left blank. 6 Chapter 2 Unpacking 2.1 Opening the Delivery Package The BPC-3600 series is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the Panel PC, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The BPC-3600 series delivery package contains the following items: BPC-3600 x 1 Power Cable x 1 Utility CD Disk x 1, including System Board User’s Manual It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 5 This page intentionally left blank. 6 Chapter 3 Hardware Installation This chapter illustrates how to install components into the Panel PC system. Please refers to system board’s manual for the external interface. 3.1 SBC Installation 1. Install the SBC on the chassis. 2. Screw the SBC with the front panel. 7 3.2 1. 8 HDD Installation Screw the hard disk on the HDD bracket. 2. Screw the HDD bracket on the back cover. 9 3.3 1. 10 Back Cover Installation Follow the photo instructions to install the back cover onto the chassis. 3.5 1. Wall Mount Kit Follow the photo instructions to install the wall mount kits onto the chassis. 11 This page intentionally left blank. 12 Chapter 4 Touch Screen Driver Installation This chapter contains the detailed information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of drivers based on WIN2000 operating systems. It is recommended that you install the drivers matching the sections listed in this chapter. 4.1 Touch Screen Driver Installation 4.1.1 Installing Touch Screen Driver in WIN95/98 1. Insert Utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying “Installation Wizard” and “PenMount Utilities Installation” screen plus “welcome” message appear, click on Next>. 13 3. The next screen is “Software License Agreement”, select “I accept” and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 14 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.2 Installing Touch Screen Driver in WIN2000 1. Insert the Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying Installation Wizard and PenMount Utilities Installation screen plus welcome message appear, click on Next>. 15 3. The next screen is Software License Agreement, select I accept and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 16 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 17 4.2 Driver Functions 4.2.1 PenMount Control Panel z Calibrate To adjust the display with touch screen, click on Calibration and follow the calibrate point to do calibration, there are five points on screen for calibration. z Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. 18 z About It shows information about PenMount controller and this driver. 4.2.2 PenMount Monitor The PenMount monitor icon is shown in the menu bar of WIN2000 system when turn on PenMount monitor from PenMount Utilities. There are several functions on PenMount monitor: z Right Click Button When select this function, there is a mouse icon shown in the right-button place of screen. It shows Left Button being as default for normal use, touch this mouse icon to change the next touch to be Right Button function. After one touch, the mouse icon will change to Left Button automatically. If user needs to use right button again, user has to touch the mouse icon again for changing the button function. z Beep Turn on or off beep sound. z Exit Close the PenMount Monitor function. 19 This page intentionally left blank. 20