BPC-6169

BPC-6169
15” Industrial Panel PC with Touch Screen,
MainBoard, 250W AT/ATX P/S,
3 x Expansion slot,
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
TTrraaddeem
maarrkkss
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.3. February 8, 2010
Table of Contents
Chapter 1
General Description ..................................1
1.1 Major Features ....................................................................... 2
1.2 Specifications ........................................................................ 2
BPC-6169-I........................................................................................................................3
BPC-6169-W.....................................................................................................................4
1.3 Backplanes............................................................................. 5
1.4 Control Keys .......................................................................... 6
1.5 Dimensions ............................................................................ 6
Chapter 2
Unpacking ..................................................7
2.1 Opening the Delivery Package............................................. 7
2.2 Inspection............................................................................... 7
Chapter 3
Hardware Installation ..............................9
3.1 Installation SBC/Backplane.................................................. 9
3.2 HDD/FDD/CD-ROM Installation .......................................... 12
3.3 Back Cover Installation....................................................... 14
Chapter 4
Touch Screen Driver Installation ..........17
4.1 Touch Screen Driver Installation ....................................... 17
4.2 Driver Functions .................................................................. 21
Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class:
Product Model Series:
This Product Complies With:
Information Technology Equipment
BPC-6169
EN55022:
Class A for Radiated emissions
EN50082-2:
Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.
Safety Instructions
The safety recommendations outlined in this section are to be read,
understood and followed before operating the product. Keep this
information in a safe place for future reference. Failure to comply with any
of the following safety procedures could result in serious damage.
Do not operate product for any purposes other than its intended use
This product is intended for indoor use only
Do not operate product if power cord is damaged in anyway
Do not insert objects into openings
Do not immerse product in water or permit liquids to spill inside
Turn off power when unattended or not in use. Unplug product before moving
it or when it is not in use for an extended period of time. The socket-outlet
shall be installed near the equipment and shall be easily accessible
Do not alter or extend electric plug. Plug is configured for appropriate
electrical supply
Do not overload electrical outlets beyond their capacity as this can result in a
fire
NOTE:
DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.
Life Expectancy of Constituent Parts
This section describes the life expectancy of constituent parts (backlight,
power supply, internal cooling fan and touch screen) which make up to
BPC-6169.
TFT Display Backlight
Display brightness decreases over time with use. The expected operating
lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours
(assuming continuous lit state at 25 degrees C). Actual lifetime result may be
different.
Touch Screen
The operating lifetime of the touch screen is approximately 1 million
operations (as tested by mechanical manipulation under 100g of force at a
rate of two presses per second)
Chapter 1
General Description
The rear of BPC-6169 design with easy assembly when needed.
The BPC-6169 has a 15” touch screen that operates under all types of
working environment. It comes with a reliable power supply with 1 of
8cm ball bearing cooling fan that enhance system stability.
The unit can also be mounted in several configurations. A variety of
BOSER SBCs is compatible with the BPC-6169. Please see 1.2
Specification section for more detail.
The BPC-6169 is IBM PC/AT compatible and can draw
from a large body of hardware and software resources
worldwide
250W power supply with UL, CE, CSA, TUV approved
Variety of operation system can be used in BPC-6169
The BPC-6169 features an all-in-one flat display and
keyboard less operation.
1
The BPC-6169 can be use widely such as, Digital
signage,
Factory
Automation,
oil
Industry,
Entertainment, transportation, POS, and kiosk, etc...
You can select a mainboard from various range to meet
your optimal configuration and budget.
1.1
Major Features
The BPC-6169 series come with the following features:
Aluminum front panel design
15” TFT color panel display
Built-in OSD key, touch screen
BPC-6169-I w/HS-7260+HPS-4S, 250W AT P/S, provides Intel®
Core™ 2 Duo/Core™ Solo processor, 1 x COM, 2 x USB2.0, DVI-I
display, 3 x PCI expansion slot
BPC-6169-W w/HS-7005+HPCI-4S, 250W ATX P/S, provides
Intel® Core™ 2 Duo Desktop/Pentium® 4/Celeron® D processor,
4 x COM, 5 x USB2.0, 3 x PCI expansion slot
Onboard graphics, dual GB ethernet controller
2 x 3.5” HDD/FDD space, 1 x 5.25” CD-ROM space
1 x 8cm ball bearing cooling fan
Option for Function keys
1.2
Specifications
Display
LCD Size
15”
Max Resolution
1024 x 768 pixels
Brightness (cd/m2)
350 cd/m2
Contrast Ratio
700:1
LCD Color
16.2M/262K colors
Pixel Pitch (mm)
0.297 x 0.297
OSD
Provides OSD function
2
Touch Screen
15” resistive
Function Keys
Provides Function Keys (option)
Mechanical
Thermal Solution
1 x 8cm ball bearing cooling fan
Dimensions (LxHxW)
43.0 x 32.1 x 15.2 cm
Cut Out Size (LxH)
40.2 x 30.6 cm
Operation/Storage Temperature
0~+45 degrees C/-20~+70 degrees C
EMC
FCC/CE
Front Panel Protection
IP65 compliance
System
BPC-6169-I
SBC Model
HS-7260
CPU
Intel® CoreTM 2 Duo/CoreTM Solo processor 1.66~2.33GHz or
CoreTM 2 Duo: T5500, T5600, T7200, T7400, T7600 (option)
BIOS
Award PnP Flash BIOS
System Chipset:
Intel® 945GME/ICH7-M
System Memory
1 x 240-pin DIMM socket up to 2GB DDR2 SDRAM
Display Chipset
CRT: Intel® 945GME integrated Intel® GMA950
DVI-I: Chrontel 7307
Ethernet Chipset
Dual Intel® 82573 10/100/1000 Mbps LAN
Drive Bay
2 x 3.5” HDD/FDD space
1 x 5.25” CD-ROM space
Watchdog Timer
Software programmable time-out intervals from 1~255 sec. or
1~255 min.
3
Expansion
3 x Standard PCI expansion slot
Backplane
HPS-4S backplane
Power Supply
115V or 230V AC in 250W AT power supply (switchable)
External I/O
1 x COM, AD Board VGA, 2 x USB2.0
Rear I/O
BPC-6169-W
SBC Model
HS-7005
CPU
Intel® CoreTM 2 Duo Desktop/Pentium® 4/Celeron® D
processor in the LGA775 package (option)
BIOS
AMI BIOS with 8Mb Flash EEPROM
System Chipset:
Intel® Q965/ICH8-DO
System Memory
2 x 240-pin DIMM sockets up to 4GB DDR2 SDRAM
Display Chipset
Intel® Q965 integrated Intel® GMA 3000 Graphics
Ethernet Chipset
Dual Marvell 88E8053 10/100/1000 Mbps LAN
Drive Bay
2 x 3.5” HDD/FDD space
1 x 5.25” CD-ROM space
Watchdog Timer
Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
Expansion
3 x Standard PCI expansion slot
Backplane
HPCI-4S backplane
4
Power Supply
115V or 230V AC in 250W ATX power supply (switchable)
External I/O
4 x COM, AD Board VGA, 5 x USB2.0 (2 x onboard, 3 x external)
Rear I/O
1.3
Backplanes
All backplanes designed by 4-layer PCB with Ground and Power
planes for reduced noise and make lower impedance. All backplanes
come with complete test.
Model
Number of Slots
Size (cm)
Name
ISA
PCI-ISA
PCI
HPS-4S
HPCI-4S
0
0
1
1
3
3
17.526(L) x 9.843(W)
26.416(L) x 9.227(W)
HPS-4S
HPCI-4S
5
1.4
Control Keys
BPC-6169 provides Function Keys and OSD Control Keys.
Function Keys Define (option)
OSD Control Keys Define
Menu: Menu/Item select
Down: Cursor down control
Up: Cursor up control
Return: Return to menu
1.5
6
Dimensions
Chapter 2
Unpacking
2.1
Opening the Delivery Package
The BPC-6169 is packed with an anti-static bag. The board contains
sensitive electrical components that are easily damaged by static
(electricity). Do not remove the anti-static wrapping until proper
grounding has been taken. Safety instruction has been described the
anti-static precautions and procedures in the previous.
2.2
Inspection
After unpacking the Panel PC, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Grounding the board and exercise extremely careful to
prevent any damages to the board from static.
Integrated circuits will sometimes come out from sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The BPC-6169 delivery package
contains the following items:
BPC-6169 x 1
Power Cable x 1
Utility CD Disk x 1, including BPC-6169 user’s Manual and System
Board User’s Manual
It is recommended that user keeps all the parts of the delivery package
intactness and store them in a safe/dry place for any requirement the
returning the product. In case you find any missing and/or damaged
items from the list, please contact your dealer or sale representatives
immediately.
7
This page intentionally left blank.
8
Chapter 3
Hardware Installation
This chapter illustrates how to install components into the Panel PC
system. External interface please refer to system board’s manual.
3.1
Installation SBC/Backplane
3.1.1 BPC-6169-I (HS-7260 + HPS-4S)
1.
Follow the photo instruction to install the Backplane onto the
chassis.
2.
Install the SBC with chassis.
9
3.
Install the SBC holding bracket.
3.1.2 BPC-6169-W (HS-7005 + HPCI-4S)
1.
10
Follow the photo instruction to install the Backplane onto the
chassis.
2.
Install the SBC into the chassis.
3.
Install the SBC holding bracket.
11
3.2
HDD/FDD/CD-ROM Installation
1.
Please loose screws and remove a CD-ROM cover.
2.
Please lose screws and remove FDD covers.
12
3.2.1 FDD Installation
3.2.2 5.25” CD-ROM Installation
3.2.3 HDD Installation
13
3.3
1.
14
Back Cover Installation
Follow the photo instruction to install the back cover into the
chassis.
15
This page intentionally left blank.
16
Chapter 4
Touch Screen Driver Installation
This chapter illustrates the detailed information for touch screen driver
installation procedures. The utility disk that came with the delivery
package contains an auto-run program that invokes the installation
programs for the touch screen driver. The following sections describe
the installation procedures of driver based on WIN2000 operating
systems. Other operation system may slightly different.
4.1
Touch Screen Driver Installation
4.1.1 Installing Touch Screen Driver in WIN95/98
1.
Insert Utility CD disk to your CD-ROM drive. The main menu
will pop up as shown below.
2.
The screen displays copying “Installation Wizard” and
“PenMount Utilities Installation” screen plus “welcome”
message appear, click on Next>.
17
3.
The next screen is “Software License Agreement”, select “I
accept” and click on Next>.
4.
The next screen is Ready to Install the Program, click on
Install.
18
5.
Once the Install Shield Wizard finishes updating your system,
it will prompt you to restart the computer. Click on Finish to
exit the wizard.
4.1.2 Installing Touch Screen Driver in WIN2000
1.
Insert Utility CD Disk to your CD-ROM drive. The main menu
will pop up as shown below.
2.
The screen displays copying Installation Wizard and PenMount
Utilities Installation screen plus welcome message appear,
click on Next>.
19
3.
The next screen is Software License Agreement, select I accept
and click on Next>.
4.
The next screen is Ready to Install the Program, click on
Install.
20
5.
4.2
Once the Install Shield Wizard finishes updating your system,
it will prompt you to restart the computer. Click on Finish to
exit the wizard.
Driver Functions
4.2.1 PenMount Control Panel
Calibrate
To adjust the display with touch screen, click on “Calibrate” button and
follow the calibrate point to do the calibration, there are five points on
screen for calibration.
21
Draw
Test or demonstrate PenMount touch screen operation, also the touch
location is shown on the display, touch DRAW to start.
About
It shows information about PenMount controller and driver version.
22
4.2.2 PenMount Monitor
The PenMount monitor icon is shown in the menu bar of Windows
system when turn on PenMount monitor from PenMount Utilities.
There are several functions on PenMount monitor:
Control Panel
When select this function, there is a mouse icon shown in the
right-button place of screen. It shows Left Button being as default for
normal use, change Right/Left button by clicking the mouse icon box.
Blue area expresses what button has been selected or actived.
Right Button
Change Right/Left button by clicking the mouse icon box. Blue area
expresses what button has been or actived.
Beep
Turn on or off beep sound.
Exit
Close the PenMount Monitor function.
23
This page intentionally left blank.
24