SSA-009 These components are RoHS compliant 3mm LED Linear Array Pb SSA 009 is a precision moulded plastic mounting block for T1 size Light Emitting Diodes. LEDs are on a 0.2 inch pitch. Material is black nylon 6 to flammability specification UL-94VO. FEATURES ♦ ♦ ♦ ♦ ♦ ♦ Eight channel block,end stackable for longer arrays. +/- 30 deg viewing angle. Will accept T1 infra red emitters or sensors. Small PCB footprint. Leads on 0.1 inch pitch double row. Less than eight positions available to special order. MECHANICAL DATA 41.1 7 PITCHES 5.08 N.A.T. 13 +0.3 +0.310.0 1 2.75 6.0 8 - 13 MIN + 0.5 SQUARE 1.27 2.54 BEDFORD OPTO TECHNOLOGY LTD, 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 6.2.00 ISS A ♦ SSA-009 ABSOLUTE MAXIMUM RATING per LED PARAMETER Value Units Reverse Voltage 6 V Forward Current 30 mA Surage Current (t>10us) 1 A -55 to +100 °C Junction Temperature (Tj) 100 °C Total Power Dissipation @ 25 °C 100 mW Thremal Resistance Juction to Air 400 K/W Storage Temperature Range ELECTRICAL CHARACTERISTICS Parameter (Tamb=25°C) Unit Colour Orange HERed Yellow Green nm 605 635 586 565 Forward Voltage Vf (If = 10mA) Volts Max 3 3 3 3 Reverse Current Ir (Vr = 6Volts) μA Max 10 10 10 Lumenous Intensity (If = 10mA) Mcd min 2.5 2.5 4 Peak Wavelength λ p 1.6 Ordering Information To specify your requirement, please state: 1 SSA -009 2 The combination of LEDs or I.R. products, in order. SSA-009X BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK , BIGGAR,LANARKSHIRE ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 6.2.00 ISS A where X = O = All Orange, H = All HERed , Y = All Yellow, G = All Green For mixed colours specify from left to right . E.g. SSA-009 HHGYYGRR 1st Element to 8th Element Custom part numbers will be issued for these combinations.