SSA-370/8 These components are RoHS compliant 3mm LED Linear Array Pb SSA 370/8 is a precision moulded plastic mounting block for T1 size Light Emitting Diodes. LEDs are on a 5mm pitch. Material is black nylon 6 to flammability specification UL-94VO. FEATURES ♦ ♦ ♦ ♦ Eight channel block,end stackable for longer arrays. +/- 30 deg viewing angle. Will accept T1 infra red emitters or sensors. Small PCB footprint. Less than eight positions available to special order. MECHANICAL DATA 40.0 6.0 7 PITCHES 5.00 NAT 3.10 11.10 3.5 2.54 LONG LEADS (ANODE) THIS SIDE 3mm LEDs BRIGHTNESS & LUMENOUS INTENSITY MATCHED VISHAY TLHX4405 A H TOP VIEW BEDFORD OPTO TECHNOLOGY LTD, 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 5.5.06 ♦ SSA-370/8 ABSOLUTE MAXIMUM RATING per LED PARAMETER All colous Blue Units Reverse Voltage 6 5 V Forward Current 30 20 mA Surage Current (t>10us) 1 0.1 A -55 to +100 -40 to +100 °C Junction Temperature (Tj) 100 100 °C Total Power Dissipation @ 25 °C 100 100 mW Thremal Resistance Juction to Air 400 400 K/W Storage Temperature Range ELECTRICAL CHARACTERISTICS Parameter (Tamb=25°C) Unit Colour Orange HERed Yellow Green Blue nm 605 635 585 565 428 Forward Voltage Vf (If = 20mA) Volts Max 3 3 3 3 4.5 Reverse Current Ir (Vr = 6Volts) μA Max 10 10 10 10 5 Lumenous Intensity (If = 10mA) Mcd min Mcd typ 1.6 4 6.3 10 6.3 10 6.3 10 6.3 15 Peak Wavelength λ p Ordering Information To specify your requirement, please state:The combination of LEDs in order SSA-370/8 A throught to H where X = O = All Orange, H = All HERed , Y = All Yellow, G = All Green For mixed colours specify from left to right . E.g. SSA-370/8 HHGYYGRR 1st Element to 8th Element Custom part numbers will be issued for these combinations. Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 5.5.06 BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK , BIGGAR,LANARKSHIRE ML12 6FX