BTCPOWER BSMT16-12-330

BTCPower
TM
Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
BSIP16-12
BSMT16-12 Series
16A SIP & SMT 12V Input DC-DC Converters
Features
•
•
•
•
•
•
•
•
•
•
Industry standard pin out
High efficiency to 94%
300KHz switching frequency
9.0 – 14 Vdc input range
0.75-5.0Vdc wide output range
Over temperature protection
Continuous short circuit protection
Remote On/Off
Cost efficient open frame design
UL / cUL 60950 certified
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Input Current
No Load
Full Load
% Efficiency
BSIP16-12-075 / BSMT16-12-075
9.0 -14 Vdc
0.75 Vdc
16A
40 mA
1299 mA
77
BSIP16-12-120 / BSMT16-12-120
9.0 -14 Vdc
1.2 Vdc
16A
50 mA
1928 mA
83
BSIP16-12-150 / BSMT16-12-150
BSIP16-12-180 / BSMT16-12-180
9.0 -14 Vdc
9.0 -14 Vdc
1.5 Vdc
1.8 Vdc
16A
16A
50 mA
60 mA
2326 mA
2727 mA
86
88
BSIP16-12-200 / BSMT16-12-200
9.0 -14 Vdc
2.0 Vdc
16A
60 mA
2996 mA
89
BSIP16-12-250 / BSMT16-12-250
9.0 -14 Vdc
2.5 Vdc
16A
65 mA
3704 mA
90
BSIP16-12-330 / BSMT16-12-330
9.0 -14 Vdc
3.3 Vdc
16A
75 mA
4783 mA
92
BSIP16-12-500 / BSMT16-12-500
9.0 -14 Vdc
5.0 Vdc
16A
75 mA
7092 mA
94
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP16-12 Rev1 10-26-04
BSIP16-12 Series
16A SIP&SMT 12Vi DC-DC Converters
BTCPower
TM
Specifications
Input Specifications:
Input Voltage Range…………….………12V………………... 9.0-14V
Under voltage lock-out ………………power up ……………8.0V Typ.
Power down ………..7.7V Typ.
Input Filter……………………………………………………Capacitive
Positive remove on /off control:
Module On …………………………Open circuit or =Vin
Switching Frequency……………………………………..300 KHz, Typ.
Over temperature protection ………………….………….. 130 ºC Typ.
Operating Temperature Range…………………………-40ºC ~ +85ºC
Power derating curve …………………………………….. see fig. 1,2.
Storage Temperature Range……………………..…..-55 ºC ~ +125ºC
Dimensions:
SIP package: 2.0” x 0.512” x 0.327“ (50.8 x 13.0 x 8.3 mm)
Module Off …………………………………….. < 0.4Vdc
Output Specifications:
Voltage Accuracy…………….. ………………………….+/- 1.5 % max.
Transient response : 25% step load change ……………< 200 u sec.
Ripple & Noise, 20 MHz BW (note3)………………….50 mV p-p max.
5Vo ………………………………...75 mV p-p max.
Temperature Coeffcient………………………… +/- 0.03 % / ºC max.
Short Circuit Protection………………………………..……Continuous
Line Regulation (note1) ………………………….……..+/- 0.2 % max.
Load Regulation (note2) …… …………….…….….….+/- 0.5 % max.
Capacitive load, low ESR…………………………………8000uF max.
General Specifications:
SMT package: 1.3” x 0.53” x 0.366” (33.0 x 12.46 x 9.3 mm)
Structure …………………………..Non-potted with open frame type
Note:
1.
Measured from high line to low line;
2.
Measured from full load to zero load;
3.
Measured with 10uF tantalum capacitor and 1 uF ceramic
capacitor across output
4.
The input terminal recommend to parallel with 100uF
capacitor ESR < 100 mohm
5.
Suffix “N” to the model number with Negative logic remote
Model On: Open circuit or < 0.4Vdc
Model Off: > +2.8Vdc to Vin
Efficiency………………………………………………..……...see table
Isolation Resistance………………………………………Non-isolation
Outline Information and Pin-out
SMT Outline information
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP16-12 Rev1 10-26-04
BSIP16-12 Series
16A SIP&SMT 12Vi DC-DC Converters
BTCPower
SIP Outline Inforamtion
Dimensions are in Inches (millimeters)
Tolerances: .XX ± 0.2” (.X ±0.5), unless otherwise noted
.XXX ±0.01” (.XX ±0.25)
PIN CONNECTION
Pin
Function
1
+ Output
2
+ Output
3
+ Sense
4
+ Output
5
Common
6
Common
7
+ V Input
8
+ V Input
9
No Pin
10
Trim
11
On / Off Control
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP16-12 Rev1 10-26-04
TM
BSIP16-12 Series
BTCPower
16A SIP&SMT 12Vi DC-DC Converters
TM
Product Brief
Temperature Typical Derating Curve
Fig 2.: Typical Derating Curve of BSMT16-12 series
Fig 1.: Typical Derating Curve of BSIP16-12 series
Trim Resistor Values
Vo (set) (V)
Rtrim (Kohm)
0.75
Open
1.2
22.33
1.5
13.0
1.8
9.0
2
7.4
2.5
5.0
3.3
3.12
3.63
1.47
Fig 3.: Simplified Schematic
The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are
subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP16-12 Rev1 10-26-04