Model 6303
4-Wire Kelvin Probe Set with
Double Banana Plug Leads
Kelvin probe configuration reduces the voltage drop in test leads, minimizing measurement inaccuracies,
making them excellent for low resistance measurements.
Single probe tip is ideal for testing surface mount and small components.
Probe tips and banana plugs are gold plated Beryllium Copper for low contact resistance.
Shielded coaxial cable reduces electrostatic interference.
Probe overmolded with Santoprene® rubber for handling comfort, added insulation protection and cable
strain relief.
Compatible with 4-wire test instruments with .75” (19,05mm) spacing between”Source” and “Sense”
Probe Body:
Outer Insulation- Gray Santoprene® Rubber
Inner Insulation- Polypropylene, One Black, One Red
Tip- Gold plated Beryllium Copper
Banana Plug:
Body- Gold Plated Brass
Spring- Beryllium Copper, Gold Plated
Insulation- Polypropylene, Color: One Black, One Red
Cable: RG174/U Length: 48” (122cm), O.D. 0.100 (2,54mm)
For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc.
Model 6303 (includes a set of one black and one red test lead)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
Page 1 of 1