Model 5940 Kelvin Clip Cable Assembly With Banana Plugs FEATURES: Ideal for resistant measurements below 1 ohm. Compatible with Fluke and Keithley 4 wire test instruments. Four wire measurement using the Kelvin Clip reduces the IR drop in test leads that can cause measurement inaccuracies on 5 ½ and 6 ½ digit DMM’s Additional banana plug and alligator clip are connected to the shield of the coaxial cables for added shield protection. Clamps and banana plugs are color coded for ease of testing. MATERIALS: Banana plugs: Gold plated Beryllium Copper for low contact resistance. RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 45 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/45 Vdc. Current: 5 Amps Operating Temperature: +122° F (+50° C) ORDERING INFORMATION: Model 5940 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094506 Page 1 of 1