Bright View Electronics FLEX STRIP LIGHT BVM-SL3 Series ■ Benefits - For any sheet of channel letters - Easy and fast installation ■ FEATURES - One unit consists of 10 LED clusters connected with flexible cables No. of LEDs :30 pcs of ultra bright SMD LEDs Drive: 12VDC Product Size (LxWxH) : 1640mm x 14mm x 8.4 mm Mounting hole (2mm) allows easy installation with screws Daisy chain connection up to 5 units Conformal coating protects against condensation water ■ APPLICATIONS - Illuminated signs Channel Letters Reverse halo Cove lighting Canopy lighting Date :2008/7/4 Page 1 of 5 PRELIMINARY Bright View Electronics FLEX STRIP LIGHT BVM-SL3 Series ■ PRODUCT DIMENSIONS Unit : mm Tolerance : ±0.5mm 36,00 36,00 68,00 160,00 ■ PART NUMBERING SYSTEM B V M - SL3 W 2 S SMD LED Operating Voltage Color Code Product Code LED Module Date :2008/7/4 Page 2 of 5 PRELIMINARY Bright View Electronics FLEX STRIP LIGHT BVM-SL3 Series ■ Maximum and minimum rating Product BVM-SL3W2S BVM-SL3B2S BVM-SL3R2S BVM-SL3G2S BVM-SL3Y2S Operating temperature[℃] -20 … 85 -20 … 85 -20 … 85 -20 … 85 -20 … 85 Storage temperature[℃] -20 … 85 -20 … 85 -20 … 85 -20 … 85 -20 … 85 Voltage Range[V] 11 .. 13 11 .. 13 11 .. 13 11 .. 13 11 .. 13 ■ Technical Operating datas Product BVM-SL3W2S BVM-SL3B2S BVM-SL3R2S BVM-SL3G2S BVM-SL3Y2S Date :2008/7/4 Color white blue red green yellow Number of Voltage Power Current LEDs [V DC] [W] [mA] 30 30 30 30 30 12 12 12 12 12 6.96 6.96 6.96 6.96 6.96 Radiance Angle[°] 580 580 580 580 580 Page 3 of 5 120 120 120 120 120 Color Temperature[K] Wavelength(nm) 6300 470 Lum. Flux [lm] 420 88.1 624 115 525 589 275 87.6 PRELIMINARY Bright View Electronics FLEX STRIP LIGHT BVM-SL3 Series ■ PACKING Bright View Electronics Co.,Ltd. PART NO.: LOTNO.: GRADE: Q'ty QA Pb-Free / RoHSCompliant ELECTROSTATICSENSITIVEDEVICES DONOT OPENORHANDLEEXCEPT AT ASTATIC-FREEWORKSTATION RE ITEM NO. DEVICE: Q'TY N. W.: G. W.: Y SETS. KGS. KGS. CARTON Dimension(cm): 54x46x32 Date :2008/7/4 Page 4 of 5 PRELIMINARY Bright View Electronics FLEX STRIP LIGHT BVM-SL3 Series ■ CAUTIONS 1. Over voltage A. Drive the product over the specified current/voltage rating per unit or per reel will damage the product. B. The product should not be used in reverse polarity. C. It is recommended to use a power supply with overload (over-voltage, short circuit and overheat) protection. 2. Storage & Handling A. Open the anti-electrostatic bag only a short time before use. B. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). Date :2008/7/4 Page 5 of 5 PRELIMINARY