Bright View Electronics RGB FLEXSTRIP LIGHT BVM-SFRGBC05 ■ DESCRIPTION - Strip light is made of high brightness SMD LEDs mounted on rigid printed circuit (PCB). White lights with red, green and blue LED integrated are available for various applications. - Bright View provides full color spectrum controller, please refer to the specifications of BVM-FSCC . - Bright View also provides connectors ■ FEATURES - Number of SMD LEDs : 250 pcs of ultra bright RGB SMD LED Product size (LxWXH) : 6300mm x 12.9mm x 2.7mm (with adhesive-tape back) Shortest unit is 150mm with 6 LEDs. Easy installation with connector Continuous length flexible LED light strips Low power consumption and high optical intensity Runs on DC 24 volt power supply Lead (Pb) free, and RoHS compliant ■ APPLICATIONS - Decorative & Entertainment Lighting Tube Light Source & LED Strip Light Architectural Lighting General Lighting Date：2008/10/13 Page ：1 of 5 Version : A Bright View Electronics RGB FLEXSTRIP LIGHT BVM-SFRGBC05 Unit : mm ■ PRODUCT DIMENSIONS SOLDER PAD SOLDER PAD ■ PART NUMBERING SYSTEM B V M - S F RGB C05 Driver Code Color Code Product Code LED Module Date：2008/10/13 Page ：2 of 5 Version : A Bright View Electronics RGB FLEXSTRIP LIGHT BVM-SFRGBC05 ■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃ PARAMETER Max. Operating Voltage Electrostatic Discharge (Contact Model) Power Dissipation/Unit Power Dissipation/Reel Operating Temperature Range Storage Temperature Range Max. Unit 25 ±2000 1.625 68.25 －30 ~ ＋50 －30 ~ ＋85 V V W W ℃ ℃ *The operating temperature measured position is on the back of the FPC. ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT LED If = 20mA Ta = 25℃ SYMBOL V λp λd 2θ1/2 I I Φ Φ PARAMETER BVM-SF25FC2S Light Color Operating Voltage (length<= 3150mm) Peak Emission Wavelength Dominant Wavelength LED Viewing Angle Operating Current/Unit (typ.) Operating Current/Reel Luminous Flux/Unit Luminous Flux/Reel Date：2008/10/13 Red 635 625 120 21 0.91 8.0 640 Page ：3 of 5 Green 24 518 525 120 21 0.91 10.0 800 Unit Blue 465 470 120 21 0.91 6.0 480 V nm nm deg. mA A lm lm Version : A Bright View Electronics RGB FLEXSTRIP LIGHT ■ PACKING BVM-SFRGBC05 Unit : cm PA RT NO .: LO T NO .: G RADE: Q 't y pcs QA EL EC T R OST AT IC S EN SITIVE DEVIC ES DO N OT OPEN OR H AND LE EX CEPT AT A ST AT IC -F R EE WORKST ATION 23 Bright View Electronics Co.,Ltd. PART NO.: LOT NO.: GRADE: Q'ty QA Pb-Free / RoHS Compliant ELECTROSTATIC SENSITIVE DEVICES DO NOT OPEN OR HANDLE EXCEPT AT A STATIC-FREE W ORKSTATION 22 Anti-electrostatic bag 24 Carton : 20 Reels 39 26 RE Date：2008/10/13 ITEM NO. DEVICE: Q'TY N. W.: G. W.: PCS. KGS. KGS. Y CARTON Dimension(cm): 39 x 24 x 26 Page ：4 of 5 Version : A Bright View Electronics RGB FLEXSTRIP LIGHT BVM-SFRGBC05 ■ CAUTIONS 1. Over voltage A. Drive the product over the specified voltage rating (25VDC) per unit or per strip will damage the product. B. The product should not be used in reverse polarity. C. It is recommended to use a power supply with overload (over-voltage, short circuit and overheat) protection. 2. Hand soldering A. It is recommended to use a tip temperature of 280 OC for less than 3 seconds (one times) with a soldering iron capacity of 30W, if hand soldering of the connecting wire is required. B. Be careful of the contaminations of hand soldering. 3. Storage & Handling A. Open the anti-electrostatic bag only a short time before use. B. LED is encapsulated with elastic resin and will be damaged with a external force applied on the top surface of the LED. C. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). D. During installation, excess mechanical stress will damage the product. The minimum bending radius of curvature is 5000mm. The maximum twist angle is 1 degree. E. The product is not waterproof. Excess moisture may also damage the product. Date：2008/10/13 Page ：5 of 5 Version : A