PHOTOCOUPLER PS2802-1,PS2802-4 HIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE SOP PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS2802-1 and PS2802-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected photo transistor in a plastic SOP for high density applications. This package has shield effect to cut off ambient light. FEATURES • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4,16-pin SOP, Pin pitch 1.27 mm) • High current transfer ratio (CTR = 2 000 % TYP. @ IF = 1 mA, VCE = 2 V) • Ordering number of tape product: PS2802-1-F3, F4, PS2802-4-F3, F4 • Safety standards: PS2802-1, -4 • UL approved: File No. E72422 (S) • BSI approved: No. 8188, 8189 • VDE0884 approved (Option): PS2802-4 only APPLICATIONS • Programmable logic controllers • Measuring instruments • Hybrid IC Document No. PN10252EJ01V0DS (1st edition) (Previous No. P10125EJ5V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2802-1,PS2802-4 PACKAGE DIMENSIONS (UNIT: mm) PS2802-1 PS2802-4 TOP VIEW 2.7±0.3 16 15 14 13 12 11 10 9 10.3±0.3 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 3 4 5 6 7 8 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector 7.0±0.3 4.4 4.4 0.15+0.10 –0.05 7.0±0.3 0.5±0.3 1.27 0.4±0.1 0.12 M 0.1±0.1 2.0+0.3 –0.2 2.0±0.1 0.1±0.1 0.15+0.10 –0.05 1 2 0.40+0.10 –0.05 0.12 M 1.27 0.5±0.3 MARKING PS2802-4 PS2802-1 2 003 PS2802-4 N 003 Assembly Lot Last number of type No. : 2 No. 1 pin Mark N 0 03 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) 2 Country Assembled Type Number Assembly Lot Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2802-1 Package 4-pin SOP PS2802-1-F3 Packing Style 50 pcs (Tape 50 pcs cut) Application Part *1 Number PS2802-1 Embossed Tape 3 500 pcs/reel PS2802-1-F4 PS2802-4 16-pin SOP PS2802-4-F3 Magazine Case 45 pcs PS2802-4 Embossed Tape 2 500 pcs/reel PS2802-4-F4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS2802-1-A Package 4-pin SOP PS2802-1-F3-A Packing Style 50 pcs (Tape 50 pcs cut) Application Part *1 Number PS2802-1 Embossed Tape 3 500 pcs/reel PS2802-1-F4-A PS2802-4-A PS2802-4-F3-A 16-pin SOP Magazine Case 45 pcs PS2802-4 Embossed Tape 2 500 pcs/reel PS2802-4-F4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10252EJ01V0DS 3 PS2802-1,PS2802-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings PS2802-1 Diode PS2802-4 Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor Unit *1 ∆PD/°C 0.6 0.8 mW/°C PD 60 80 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 6 V Collector Current IC 90 100 mA/ch ∆PC/°C 1.2 mW/°C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.1 1.4 V 5 µA 15 pF Transistor Collector to Emitter Dark Current ICEO VCE = 40 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 1 mA, VCE = 2 V Collector Saturation Voltage VCE(sat) IF = 1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pF VCC = 5 V, IC = 2 mA, RL = 100 Ω 200 µs Rise Time Fall Time *2 tr *2 tf 400 200 2 000 % 1.0 10 nA V Ω 11 200 *1 CTR rank (PS2802-1 only) K : 2 000 to (%) L : 700 to 3 400 (%) M : 200 to 1 000 (%) N : 200 to (%) *2 Test circuit for switching time VCC Pulse Input PW = 1 ms Duty Cycle = 1/10 IF Vout 50 Ω RL = 100 Ω Data Sheet PN10252EJ01V0DS 5 PS2802-1,PS2802-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE PS2802-4 0.8 mW/˚C 60 PS2802-1 40 0.6 mW/˚C 20 0 100 50 Forward Current IF (mA) Transistor Power Dissipation PC (mW) 80 25 75 50 80 60 1.2 mW/˚C 40 20 25 75 50 100 FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 TA = +100 ˚C +60 ˚C +25 ˚C 140 5 0 ˚C –25 ˚C –50 ˚C 1 0.5 120 5 mA 100 80 2 mA 60 40 1 mA 20 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 IF = 0.5 mA 2 4 6 10 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 200 10 000 Collector Current IC (mA) VCE = 2 V 5V 10 V 24 V 40 V 1 000 100 10 1 –50 IF = 10 mA 100 5 mA 1 mA 50 0.5 mA 10 5 0.2 mA 1 0.1 mA 0.5 0.2 –25 0 25 50 75 100 0.4 0.6 0.8 1.0 1.2 1.4 Collector Saturation Voltage VCE(sat) (V) Ambient Temperature TA (˚C) 6 PS2802-1 PS2802-4 Ambient Temperature TA (˚C) 0.1 Collector to Emitter Dark Current ICEO (nA) 100 Ambient Temperature TA (˚C) 10 0.7 120 0 100 Collector Current IC (mA) Diode Power Dissipation PD (mW) 100 Data Sheet PN10252EJ01V0DS 1.6 ; ;;; PS2802-1,PS2802-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 8 000 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 0.2 –50 –25 25 0 50 75 Sample A B C D 5 000 4 000 3 000 2 000 1 000 0.5 0 0.1 1 5 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 30 3 000 Current Transfer Ratio CTR (%) 1 000 tf tr 100 ts td 10 0.5 0.1 VCE = 2 V 2 500 2 000 1 000 500 0 5.0 1.0 Sample A B C D 1 500 10 50 Load Resistance RL (kΩ) Forward Current IF (µA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE VCC = 5 V, IF = 1 mA, CTR = 1 910 % tf 0 Normalized Gain Gv 1 000 ts 100 tr 10 td 1 0.1 500 100 10 000 Switching Time t (µs) 10 Ambient Temperature TA (˚C) VCC = 5 V, IC = 2 mA, CTR = 1 910 % Switching Time t (µ s) 6 000 100 10 000 1 VCE = 2 V 7 000 1.0 10 IF = 1 mA, VCE = 2 V –5 –10 –15 RL = 100 Ω –20 100 0.2 0.5 1 2 5 10 20 50 100 200 Frequency f (kHz) Load Resistance RL (kΩ) Data Sheet PN10252EJ01V0DS 7 PS2802-1,PS2802-4 LONG TERM CTR DEGRADATION 1.2 IF = 1 mA TA = 25 ˚C CTR (Relative Value) 1.0 0.8 60 ˚C 0.6 0.4 0.2 0.0 10 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 TAPING SPECIFICATIONS (UNIT: mm) φ 1.5+0.1 –0 7.5±0.1 4.0±0.1 16.0±0.3 2.0±0.1 7.55±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.55±0.1 2.3±0.1 2.85±0.1 4.0±0.1 Tape Direction 2003 2003 2003 2003 2003 2003 2003 2003 2003 PS2802-1-F4 2003 PS2802-1-F3 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel Data Sheet PN10252EJ01V0DS 15.9 to 19.4 Outer edge of flange 9 PS2802-1,PS2802-4 2.8 MAX. 10.7±0.1 7.5±0.1 φ 1.5+0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 2.3±0.1 8.3±0.1 1.55±0.1 12.0±0.1 Tape Direction PS2802-4-F3 PS2802-4-F4 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel 10 Data Sheet PN10252EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2802-1,PS2802-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10252EJ01V0DS 11 PS2802-1,PS2802-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Ya Xaxis xis Servo Motor Servo Motor Sensor Controller Amplifier Motor Controller Heater Controller Pulse Generator COM PS2802–1 PS2802–4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit CRT M Computer Terminal Terminal Printer Printer Power Supply PC Programmable Logic Controller FDD Controller Memory Cassette Data Sheet PN10252EJ01V0DS 13 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.