MP15M SERIES SINGLE-PHASE 15 AMPS. SILICON BRIDGE RECTIFIERS CHENG- YI ELECTRONIC VOLTAGE RANGE 50 TO 1000 VOLTS PRV CURRENT 15 Amperes FEATURES 300 Amps Surge capability CASE: Molded Plastic with Heatsink Interally Mounted in the Bridge Encapsulation Electrically isolated metal case for maximum heat dissipation Mounting: thru hole for #6 screw MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MP15005M MP1501M MP1502M MP1504M MP1506M MP1508M MP1510M UNITS 100 200 400 600 800 1000 V Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Output Current @ TA=55 C V(AV) 15 A Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load(JEDEC Method) IFSM 200 A Maximum Forward Voltage per Bridge Element VF 1.1 V Maximum DC Reverse Current at rated @ TA=25 C DC Blocking Voltage Per Bridge Element IR 10 Operating Temperature Range TJ -55 to +125 0 TSTG -55 to +125 0 0 MP15 at IF 7.5A 0 Storage Temperature Range *(Plastic case & Metal base) A C C MP15M SERIES SINGLE-PHASE 15 AMPS. SILICON BRIDGE RECTIFIERS CHENG- YI ELECTRONIC RATING AND CHARACTERISTICS CURVES MP15M SERIES Fig.2 - DERATING CURVE FOR 300 250 200 150 100 50 0 1 10 100 AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES Fig.1 - MAXIMUM FORWARD SURGE CURRENT OUTPUT RECTIFIED CURRENT 20 15 10 5 0 50 100 TEMPERATURE, 0 C NUMBER OF CYCLES AT 60 Hz Fig.3 - TYPICAL FORWARD CHARACTERISTICS Fig.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT. AMPERES 100 10 1.0 0.1 1.0 TJ=250C 0.1 .01 0 .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE 120 140